X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls2080a_common.h;h=d93ff291bdc35f40b4d8027c58ddf5270dcdb5ef;hb=8d1fc6fb89826efb6bbbedb57862496e18737877;hp=393112f50df47a2c3283b153bef8d9c22f521b3e;hpb=c1b62ba9ca0e41fdd548cb3bb9af3b3f90d4a393;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 393112f..d93ff29 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -1,48 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2017 NXP
  * Copyright (C) 2014 Freescale Semiconductor
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __LS2_COMMON_H
 #define __LS2_COMMON_H
 
 #define CONFIG_REMAKE_ELF
-#define CONFIG_FSL_LAYERSCAPE
-#define CONFIG_MP
 #define CONFIG_GICV3
-#define CONFIG_FSL_TZPC_BP147
 
 #include <asm/arch/stream_id_lsch3.h>
 #include <asm/arch/config.h>
 
 /* Link Definitions */
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
+#else
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
 
 /* We need architecture specific misc initializations */
 
 /* Link Definitions */
-#ifndef CONFIG_QSPI_BOOT
-#ifdef CONFIG_SPL
-#define CONFIG_SYS_TEXT_BASE		0x80400000
-#else
-#define CONFIG_SYS_TEXT_BASE		0x30100000
-#endif
-#else
-#define CONFIG_SYS_TEXT_BASE		0x20100000
-#define CONFIG_ENV_SIZE			0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
-#define CONFIG_ENV_SECT_SIZE		0x40000
-#endif
-
-#define CONFIG_SUPPORT_RAW_INITRD
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-#ifndef CONFIG_SPL
-#define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
-#endif
 #ifndef CONFIG_SYS_FSL_DDR4
 #define CONFIG_SYS_DDR_RAW_TIMING
 #endif
@@ -59,7 +42,7 @@
 /*
  * SMP Definitinos
  */
-#define CPU_RELEASE_ADDR		secondary_boot_func
+#define CPU_RELEASE_ADDR		secondary_boot_addr
 
 #define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS
 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
@@ -84,15 +67,11 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2048 * 1024)
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_MXC_I2C4		/* enable I2C bus 4 */
+#endif
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
@@ -167,11 +146,9 @@ unsigned long long get_qixis_addr(void);
  * 512MB aligned, so the min size to hide is 512MB.
  */
 #ifdef CONFIG_FSL_MC_ENET
-#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE		(512UL * 1024 * 1024)
+#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE		(128UL * 1024 * 1024)
 #endif
 
-/* Command line configuration */
-
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 
@@ -179,8 +156,6 @@ unsigned long long get_qixis_addr(void);
 /* fixme: these need to be checked against the board */
 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
 
-#define CONFIG_NR_DRAM_BANKS		3
-
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
@@ -203,10 +178,7 @@ unsigned long long get_qixis_addr(void);
 	"mcinitcmd=fsl_mc start mc 0x580a00000"	\
 	" 0x580e00000 \0"
 
-#define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/ram0 " \
-				"earlycon=uart8250,mmio,0x21c0500 " \
-				"ramdisk_size=0x2000000 default_hugepagesz=2m" \
-				" hugepagesz=2m hugepages=256"
+#ifndef CONFIG_TFABOOT
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_BOOTCOMMAND	"mmc read 0x80200000 0x6800 0x800;"\
 				" fsl_mc apply dpl 0x80200000 &&" \
@@ -217,26 +189,17 @@ unsigned long long get_qixis_addr(void);
 				" cp.b $kernel_start $kernel_load" \
 				" $kernel_size && bootm $kernel_load"
 #endif
+#endif
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING		1
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS		64	/* max command args */
 
-#define CONFIG_PANIC_HANG	/* do not reset board on panic */
-
 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x00100000
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_MAX_SIZE		0x16000
 #define CONFIG_SPL_STACK		(CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE		0x1800a000
 
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x80400000
@@ -244,7 +207,7 @@ unsigned long long get_qixis_addr(void);
 #endif
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START	0x80200000
-#define CONFIG_SYS_MONITOR_LEN		(640 * 1024)
+#define CONFIG_SYS_MONITOR_LEN		(1024 * 1024)
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */