X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls2080a_common.h;h=57e2a2919c1fd5be8744302c15c1c0c656a44d19;hb=e16e137c377c8b96d8d91263d0b6d8470169f841;hp=969aed698cfca269c828fbddcf2c63319f0961fb;hpb=b22b1dc6b7b5a74c7655a85b312ff3df0e69c4fe;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 969aed6..57e2a29 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -15,9 +15,6 @@
 #define CONFIG_GICV3
 #define CONFIG_FSL_TZPC_BP147
 
-/* Errata fixes */
-#define CONFIG_ARM_ERRATA_828024
-#define CONFIG_ARM_ERRATA_826974
 
 #include <asm/arch/ls2080a_stream_id.h>
 #include <asm/arch/config.h>
@@ -47,15 +44,6 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F	1
 
-/* Flat Device Tree Definitions */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
-
 #ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
 #endif
@@ -183,10 +171,9 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET    0x00F00000
 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH	    0x20000
 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET    0x00F20000
-#ifdef CONFIG_LS2085A
+/* For LS2085A */
 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH	0x200000
 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET	0x07000000
-#endif
 
 /*
  * Carve out a DDR region which will not be used by u-boot/Linux
@@ -195,10 +182,9 @@ unsigned long long get_qixis_addr(void);
  * 512MB aligned, so the min size to hide is 512MB.
  */
 #if defined(CONFIG_FSL_MC_ENET) || defined(CONFIG_FSL_DEBUG_SERVER)
-#define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE	(256UL * 1024 * 1024)
-#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE		(256UL * 1024 * 1024)
-#define CONFIG_SYS_MEM_TOP_HIDE_MIN			(512UL * 1024 * 1024)
-#define CONFIG_SYS_MEM_TOP_HIDE		get_dram_size_to_hide()
+#define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE	(254UL * 1024 * 1024)
+#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE		(512UL * 1024 * 1024)
+#define CONFIG_SYS_MC_RSV_MEM_ALIGN			(512UL * 1024 * 1024)
 #endif
 
 /* PCIe */
@@ -211,10 +197,6 @@ unsigned long long get_qixis_addr(void);
 #define FSL_PCIE_COMPAT "fsl,ls2080a-pcie"
 #endif
 
-#ifdef CONFIG_LS2085A
-#define FSL_PCIE_COMPAT "fsl,ls2085a-pcie"
-#endif
-
 #define CONFIG_SYS_PCI_64BIT
 
 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
@@ -268,14 +250,17 @@ unsigned long long get_qixis_addr(void);
 	"kernel_start=0x581200000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
-	"console=ttyAMA0,38400n8\0"
+	"console=ttyAMA0,38400n8\0"		\
+	"mcinitcmd=fsl_mc start mc 0x580300000"	\
+	" 0x580800000 \0"
 
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/ram0 " \
-				"earlycon=uart8250,mmio,0x21c0500" \
+				"earlycon=uart8250,mmio,0x21c0500 " \
 				"ramdisk_size=0x2000000 default_hugepagesz=2m" \
-				" hugepagesz=2m hugepages=16"
-#define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
-					"$kernel_size && bootm $kernel_load"
+				" hugepagesz=2m hugepages=256"
+#define CONFIG_BOOTCOMMAND	"fsl_mc apply dpl 0x580700000 &&" \
+				" cp.b $kernel_start $kernel_load" \
+				" $kernel_size && bootm $kernel_load"
 #define CONFIG_BOOTDELAY		10
 
 /* Monitor Command Prompt */
@@ -290,10 +275,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS		64	/* max command args */
 
-#ifndef __ASSEMBLY__
-unsigned long get_dram_size_to_hide(void);
-#endif
-
 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80100000