X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1088ardb.h;h=f52ea4d746c7e9dc1529af6628e2404c62ec069e;hb=87f78478a4a1bf574db0b0e575ca37cf91fb187c;hp=363154a40b386325fda230c52707d25a3cbe4c9b;hpb=863e42e8b1f9e97d87919e20e34a7b98089f7522;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 363154a..f52ea4d 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -8,6 +8,15 @@
 
 #include "ls1088a_common.h"
 
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+#define CONFIG_ENV_SIZE			0x2000          /* 8KB */
+#define CONFIG_ENV_OFFSET		0x500000
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + \
+					 CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SECT_SIZE		0x40000
+#else
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_ENV_SIZE			0x2000          /* 8KB */
 #define CONFIG_ENV_SECT_SIZE		0x40000
@@ -21,8 +30,10 @@
 #define CONFIG_ENV_SECT_SIZE		0x20000
 #define CONFIG_ENV_SIZE			0x20000
 #endif
+#endif /* CONFIG_TFABOOT */
 
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+	defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_QIXIS_I2C_ACCESS
 #endif
@@ -78,9 +89,6 @@
 #define CONFIG_SYS_IFC_CCR	0x01000000
 
 #ifndef SYS_NO_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
 
@@ -188,7 +196,8 @@
 					FTIM2_GPCM_TWP(0x3E))
 #define SYS_FPGA_CS_FTIM3	0x0
 
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+	defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
@@ -218,7 +227,6 @@
 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
 #endif
 
-
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
 #define I2C_MUX_CH_VOL_MONITOR          0xA
@@ -277,8 +285,8 @@
 
 #ifndef SPL_NO_QSPI
 /* QSPI device */
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_FSL_QSPI
+#if defined(CONFIG_TFABOOT) || \
+	defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define FSL_QSPI_FLASH_SIZE		(1 << 26)
 #define FSL_QSPI_FLASH_NUM		2
 #endif
@@ -298,6 +306,26 @@
 
 #ifndef SPL_NO_ENV
 /* Initial environment variables */
+#ifdef CONFIG_TFABOOT
+#define QSPI_MC_INIT_CMD				\
+	"sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
+	"sf read 0x80100000 0xE00000 0x100000;"				\
+	"env exists secureboot && "			\
+	"sf read 0x80700000 0x700000 0x40000 && "	\
+	"sf read 0x80740000 0x740000 0x40000 && "	\
+	"esbc_validate 0x80700000 && "			\
+	"esbc_validate 0x80740000 ;"			\
+	"fsl_mc start mc 0x80000000 0x80100000\0"
+#define SD_MC_INIT_CMD				\
+	"mmcinfo;mmc read 0x80000000 0x5000 0x800;"		\
+	"mmc read 0x80100000 0x7000 0x800;"				\
+	"env exists secureboot && "			\
+	"mmc read 0x80700000 0x3800 0x10 && "		\
+	"mmc read 0x80740000 0x3A00 0x10 && "		\
+	"esbc_validate 0x80700000 && "			\
+	"esbc_validate 0x80740000 ;"			\
+	"fsl_mc start mc 0x80000000 0x80100000\0"
+#else
 #if defined(CONFIG_QSPI_BOOT)
 #define MC_INIT_CMD				\
 	"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
@@ -321,8 +349,84 @@
 	"fsl_mc start mc 0x80000000 0x80100000\0"	\
 	"mcmemsize=0x70000000\0"
 #endif
+#endif /* CONFIG_TFABOOT */
 
 #undef CONFIG_EXTRA_ENV_SETTINGS
+#ifdef CONFIG_TFABOOT
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"BOARD=ls1088ardb\0"			\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"ramdisk_addr=0x800000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"fdt_high=0xa0000000\0"			\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"fdt_addr=0x64f00000\0"			\
+	"kernel_addr=0x1000000\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernelhdr_addr_sd=0x4000\0"		\
+	"kernel_start=0x580100000\0"		\
+	"kernelheader_start=0x580800000\0"	\
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr=0x800000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x81000000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernel_size_sd=0x14000\0"		\
+	"kernelhdr_size_sd=0x10\0"		\
+	QSPI_MC_INIT_CMD			\
+	"mcmemsize=0x70000000\0"		\
+	BOOTENV					\
+	"boot_scripts=ls1088ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1088ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"					\
+	"scan_dev_for_boot="					\
+		"echo Scanning ${devtype} "			\
+		"${devnum}:${distro_bootpart}...; "		\
+		"for prefix in ${boot_prefixes}; do "		\
+			"run scan_dev_for_scripts; "		\
+		"done;\0"					\
+	"boot_a_script="					\
+		"load ${devtype} ${devnum}:${distro_bootpart} " \
+		"${scriptaddr} ${prefix}${script}; "		\
+	"env exists secureboot && load ${devtype} "		\
+		"${devnum}:${distro_bootpart} "			\
+		"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+		"&& esbc_validate ${scripthdraddr};"		\
+		"source ${scriptaddr}\0"			\
+	"installer=load mmc 0:2 $load_addr "			\
+		"/flex_installer_arm64.itb; "			\
+		"env exists mcinitcmd && run mcinitcmd && "	\
+		"mmc read 0x80001000 0x6800 0x800;"		\
+		"fsl_mc lazyapply dpl 0x80001000;"			\
+		"bootm $load_addr#ls1088ardb\0"			\
+	"qspi_bootcmd=echo Trying load from qspi..;"		\
+		"sf probe && sf read $load_addr "		\
+		"$kernel_addr $kernel_size ; env exists secureboot "	\
+		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		"bootm $load_addr#$BOARD\0"			\
+		"sd_bootcmd=echo Trying load from sd card..;"		\
+		"mmcinfo; mmc read $load_addr "			\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"env exists secureboot && mmc read $kernelheader_addr_r "\
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$BOARD\0"
+#else
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"BOARD=ls1088ardb\0"			\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
@@ -395,8 +499,28 @@
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
 		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$BOARD\0"
+#endif /* CONFIG_TFABOOT */
 
 #undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND					\
+		"sf read 0x80001000 0xd00000 0x100000;"		\
+		"env exists mcinitcmd && env exists secureboot "	\
+		" && sf read 0x80780000 0x780000 0x100000 "	\
+		"&& esbc_validate 0x80780000;env exists mcinitcmd "	\
+		"&& fsl_mc lazyapply dpl 0x80001000;"		\
+		"run distro_bootcmd;run qspi_bootcmd;"		\
+		"env exists secureboot && esbc_halt;"
+#define SD_BOOTCOMMAND						\
+		"env exists mcinitcmd && mmcinfo; "		\
+		"mmc read 0x80001000 0x6800 0x800; "		\
+		"env exists mcinitcmd && env exists secureboot "	\
+		" && mmc read 0x80780000 0x3C00 0x10 "		\
+		"&& esbc_validate 0x80780000;env exists mcinitcmd "	\
+		"&& fsl_mc lazyapply dpl 0x80001000;"		\
+		"run distro_bootcmd;run sd_bootcmd;"		\
+		"env exists secureboot && esbc_halt;"
+#else
 #if defined(CONFIG_QSPI_BOOT)
 /* Try to boot an on-QSPI kernel first, then do normal distro boot */
 #define CONFIG_BOOTCOMMAND                                      \
@@ -420,15 +544,13 @@
 		"run distro_bootcmd;run sd_bootcmd;"		\
 		"env exists secureboot && esbc_halt;"
 #endif
+#endif /* CONFIG_TFABOOT */
 
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET
-#define CONFIG_PHYLIB_10G
-#define CONFIG_PHY_GIGE
 #define CONFIG_PHYLIB
 
 #define CONFIG_PHY_VITESSE
-#define CONFIG_PHY_AQUANTIA
 #define AQ_PHY_ADDR1			0x00
 #define AQR105_IRQ_MASK			0x00000004