X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1088ardb.h;h=c0567c3fe580a9e8e54970316a046521b638f144;hb=9ff4ce8abc627b8696c9bd6fd726dd1dbf4b9a5c;hp=4cb5d7517f3dc627a382c1dd1a253c5145c75491;hpb=0f9595b9fa68ed1634adddf989fd037909eec433;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 4cb5d75..c0567c3 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -10,23 +10,13 @@
 
 #if defined(CONFIG_TFABOOT) || \
 	defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_QIXIS_I2C_ACCESS
-#endif
 #define SYS_NO_FLASH
 #endif
 
 #define COUNTER_FREQUENCY_REAL		25000000	/* 25MHz */
-#define COUNTER_FREQUENCY		25000000	/* 25MHz */
 
-#ifdef CONFIG_EMU
-#define CONFIG_SYS_FSL_DDR_EMU
-#else
 #define CONFIG_MEM_INIT_VALUE		0xdeadbeef
-#endif
 #define SPD_EEPROM_ADDRESS	0x51
-#define CONFIG_SYS_SPD_BUS_NUM	0	/* SPD on I2C bus 0 */
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
 
 
 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
@@ -105,10 +95,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
-#ifndef SPL_NO_QIXIS
-#define CONFIG_FSL_QIXIS
-#endif
-
 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
 #define QIXIS_BRDCFG4_OFFSET            0x54
 #define QIXIS_LBMAP_SWITCH		2
@@ -222,12 +208,6 @@
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM		0
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#endif
-
 #define CONFIG_FSL_MEMAC
 
 #ifndef SPL_NO_ENV
@@ -286,7 +266,6 @@
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"fdt_addr=0x64f00000\0"			\
 	"kernel_addr=0x1000000\0"		\
 	"kernel_addr_sd=0x8000\0"		\
 	"kernelhdr_addr_sd=0x3000\0"		\
@@ -355,7 +334,6 @@
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"fdt_addr=0x64f00000\0"			\
 	"kernel_addr=0x1000000\0"		\
 	"kernel_addr_sd=0x8000\0"		\
 	"kernelhdr_addr_sd=0x3000\0"		\
@@ -455,8 +433,6 @@
 #define QSGMII2_PORT2_PHY_ADDR		0x1d
 #define QSGMII2_PORT3_PHY_ADDR		0x1e
 #define QSGMII2_PORT4_PHY_ADDR		0x1f
-
-#define CONFIG_ETHPRIME		"DPMAC1@xgmii"
 #endif
 #endif