X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1088aqds.h;h=747ee9d4428a796d4fdfd72a37194420d4937fa5;hb=b8e09898919e23c5d7f1934be7bf9a3a6f0deb0e;hp=5912fe95ccfbc9c632bd3900046b950aa8d4e327;hpb=111a8b57354bb5aff55635502a0cdf74cb63e835;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 5912fe9..747ee9d 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -9,20 +9,13 @@
 #include "ls1088a_common.h"
 
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_QIXIS_I2C_ACCESS
 #define SYS_NO_FLASH
-#else
-#define CONFIG_QIXIS_I2C_ACCESS
 #endif
 
 #define COUNTER_FREQUENCY_REAL		(get_board_sys_clk()/4)
-#define COUNTER_FREQUENCY		25000000	/* 25MHz */
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
 
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #define SPD_EEPROM_ADDRESS		0x51
-#define CONFIG_SYS_SPD_BUS_NUM		0
 
 
 /*
@@ -69,15 +62,8 @@
 #define CONFIG_SYS_IFC_CCR	0x01000000
 
 #ifndef SYS_NO_FLASH
-#define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE,\
 					 CONFIG_SYS_FLASH_BASE + 0x40000000}
 #endif
@@ -119,7 +105,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
-#define CONFIG_FSL_QIXIS
 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
 #define QIXIS_LBMAP_SWITCH		6
 #define QIXIS_QMAP_MASK			0xe0
@@ -312,18 +297,6 @@
 #endif
 #endif
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#endif
-
-#define CONFIG_FSL_MEMAC
-
-/*  MMC  */
-#define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
-	QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
-
 #define COMMON_ENV \
 	"kernelheader_addr_r=0x80200000\0"	\
 	"fdtheader_addr_r=0x80100000\0"		\
@@ -492,7 +465,6 @@
 #endif
 
 #ifdef CONFIG_FSL_MC_ENET
-#define CONFIG_FSL_MEMAC
 #define RGMII_PHY1_ADDR		0x1
 #define RGMII_PHY2_ADDR		0x2
 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
@@ -517,8 +489,6 @@
 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 
-#define CONFIG_ETHPRIME		"DPMAC1@xgmii"
-
 #endif
 
 #define BOOT_TARGET_DEVICES(func) \