X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1088a_common.h;h=ff85f1eb4ac85a49dd96e55f3d3244366436af8d;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=3f0679cf05ad7f11bb5b0803ebf4d2036a9a9255;hpb=69d9eda4da13ecabb8002fce0dded4bba3bff9f9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 3f0679c..ff85f1e 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -17,28 +17,18 @@
 #define SPL_NO_SATA
 #define SPL_NO_QSPI
 #define SPL_NO_IFC
-#undef CONFIG_DISPLAY_CPUINFO
 #endif
 
-#define CONFIG_REMAKE_ELF
-
 #include <asm/arch/stream_id_lsch3.h>
 #include <asm/arch/config.h>
 #include <asm/arch/soc.h>
 
 #define LS1088ARDB_PB_BOARD            0x4A
 /* Link Definitions */
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
-#else
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
-#endif
 
 /* Link Definitions */
 #define CONFIG_SYS_FSL_QSPI_BASE	0x20000000
 
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
@@ -50,20 +40,9 @@
  */
 #define CPU_RELEASE_ADDR		secondary_boot_addr
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2048 * 1024)
-
 /* GPIO */
-#ifdef CONFIG_DM_GPIO
-#ifndef CONFIG_MPC8XXX_GPIO
-#define CONFIG_MPC8XXX_GPIO
-#endif
-#endif
 
 /* I2C */
-#if !CONFIG_IS_ENABLED(DM_I2C)
-#define CONFIG_SYS_I2C_LEGACY
-#endif
 
 
 /* Serial Port */
@@ -71,13 +50,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS)
-/* IFC */
-#define CONFIG_FSL_IFC
-#endif
-
 /*
  * During booting, IFC is mapped at the region of 0x30000000.
  * But this region is limited to 256MB. To accommodate NOR, promjet
@@ -130,11 +102,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH	0x200000
 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET	0x07000000
 
-/* Define phy_reset function to boot the MC based on mcinitcmd.
- * This happens late enough to properly fixup u-boot env MAC addresses.
- */
-#define CONFIG_RESET_PHY_R
-
 /*
  * Carve out a DDR region which will not be used by u-boot/Linux
  *
@@ -147,27 +114,12 @@ unsigned long long get_qixis_addr(void);
 #endif
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
-
-/* SATA */
-#ifdef CONFIG_SCSI
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SATA1		AHCI_BASE_ADDR1
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					CONFIG_SYS_SCSI_MAX_LUN)
-#endif
 
 /* Physical Memory Map */
-#define CONFIG_CHIP_SELECTS_PER_CTRL	4
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
-/* #define CONFIG_DISPLAY_CPUINFO */
-
 #ifndef SPL_NO_ENV
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
@@ -184,45 +136,9 @@ unsigned long long get_qixis_addr(void);
 	"console=ttyAMA0,38400n8\0"		\
 	"mcinitcmd=fsl_mc start mc 0x580a00000"	\
 	" 0x580e00000 \0"
-
-#ifndef CONFIG_TFABOOT
-#if defined(CONFIG_QSPI_BOOT)
-#define CONFIG_BOOTCOMMAND	"sf probe 0:0;" \
-				"sf read 0x80001000 0xd00000 0x100000;"\
-				" fsl_mc lazyapply dpl 0x80001000 &&" \
-				" sf read $kernel_load $kernel_start" \
-				" $kernel_size && bootm $kernel_load"
-#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND	"mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
-				" fsl_mc lazyapply dpl 0x80001000 &&" \
-				" mmc read $kernel_load $kernel_start" \
-				" $kernel_size && bootm $kernel_load"
-#else /* NOR BOOT*/
-#define CONFIG_BOOTCOMMAND	"fsl_mc lazyapply dpl 0x580d00000 &&" \
-				" cp.b $kernel_start $kernel_load" \
-				" $kernel_size && bootm $kernel_load"
-#endif
-#endif /* CONFIG_TFABOOT  */
 #endif
 
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
-#define CONFIG_SYS_MAXARGS		64	/* max command args */
-
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_BSS_START_ADDR      0x80100000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x00100000
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
-#define CONFIG_SPL_MAX_SIZE            0x16000
-#define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
-#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
-#define CONFIG_SYS_SPL_MALLOC_START    0x80200000
-
 #ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE		(16 << 10)
 /*