X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1088a_common.h;h=bcba8d81c04c0c5cdc9f0b9ad23bce762629dd98;hb=308520b8f2b11b3427fe8a02171839992bc85da6;hp=9350daded1aa2e49273c6502fcd82af65e996482;hpb=a8c281d4b737129c4f5cb52cb0821e6d055bbca3;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 9350dad..bcba8d8 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -17,7 +17,6 @@ #define SPL_NO_SATA #define SPL_NO_QSPI #define SPL_NO_IFC -#undef CONFIG_DISPLAY_CPUINFO #endif #include @@ -26,21 +25,14 @@ #define LS1088ARDB_PB_BOARD 0x4A /* Link Definitions */ -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) -#endif /* Link Definitions */ -#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000 - -#define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL -#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL -#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 +#define CFG_SYS_FSL_QSPI_BASE 0x20000000 + +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL /* * SMP Definitinos */ @@ -52,9 +44,7 @@ /* Serial Port */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) +#define CFG_SYS_NS16550_CLK (get_bus_freq(0) / 2) /* * During booting, IFC is mapped at the region of 0x30000000. @@ -73,18 +63,18 @@ * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) * * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation. - * CONFIG_SYS_FLASH_BASE has the final address (core view) - * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) - * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address - * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting + * CFG_SYS_FLASH_BASE has the final address (core view) + * CFG_SYS_FLASH_BASE_PHYS has the final address (IFC view) + * CFG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address + * CONFIG_TEXT_BASE is linked to 0x30000000 for booting */ -#define CONFIG_SYS_FLASH_BASE 0x580000000ULL -#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000 -#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 +#define CFG_SYS_FLASH_BASE 0x580000000ULL +#define CFG_SYS_FLASH_BASE_PHYS 0x80000000 +#define CFG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 -#define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000 -#define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 +#define CFG_SYS_FLASH1_BASE_PHYS 0xC0000000 +#define CFG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 #ifndef __ASSEMBLY__ unsigned long long get_qixis_addr(void); @@ -95,23 +85,18 @@ unsigned long long get_qixis_addr(void); #define QIXIS_BASE_PHYS_EARLY 0xC000000 -#define CONFIG_SYS_NAND_BASE 0x530000000ULL -#define CONFIG_SYS_NAND_BASE_PHYS 0x30000000 +#define CFG_SYS_NAND_BASE 0x530000000ULL +#define CFG_SYS_NAND_BASE_PHYS 0x30000000 /* MC firmware */ /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ -#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 -#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 -#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 -#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 -#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 -#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 - -/* Define phy_reset function to boot the MC based on mcinitcmd. - * This happens late enough to properly fixup u-boot env MAC addresses. - */ -#define CONFIG_RESET_PHY_R +#define CFG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 +#define CFG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 +#define CFG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 +#define CFG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 +#define CFG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 +#define CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 /* * Carve out a DDR region which will not be used by u-boot/Linux @@ -121,30 +106,15 @@ unsigned long long get_qixis_addr(void); */ #if defined(CONFIG_FSL_MC_ENET) -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) +#define CFG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) #endif /* Miscellaneous configurable options */ -/* SATA */ -#ifdef CONFIG_SCSI -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 - -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) -#endif - /* Physical Memory Map */ -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 -#define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 -/* #define CONFIG_DISPLAY_CPUINFO */ - #ifndef SPL_NO_ENV /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -163,23 +133,7 @@ unsigned long long get_qixis_addr(void); " 0x580e00000 \0" #endif -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - #ifdef CONFIG_SPL -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SPL_MAX_SIZE 0x16000 -#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" - -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 - #ifdef CONFIG_NXP_ESBC #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) /* @@ -188,12 +142,8 @@ unsigned long long get_qixis_addr(void); * size increases then increase this size in case of secure boot as * it uses raw u-boot image instead of fit image. */ -#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) -#else -#define CONFIG_SYS_MONITOR_LEN 0x100000 #endif /* ifdef CONFIG_NXP_ESBC */ #endif -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #endif /* __LS1088_COMMON_H */