X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1088a_common.h;h=ab5b396e1a5991933ee5c96b650cfc883ab174c1;hb=a09fea1d28fe3c69a64bee092f5a764274d26ca2;hp=c70474cdfacb86ae0df55cfa62a93c64d43c628b;hpb=1612ff0dfba57b1002d8c7a54778eb553ace98f4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index c70474c..ab5b396 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017 NXP
+ * Copyright 2017-2018 NXP
  */
 
 #ifndef __LS1088_COMMON_H
@@ -21,30 +21,30 @@
 #endif
 
 #define CONFIG_REMAKE_ELF
-#define CONFIG_FSL_LAYERSCAPE
 
 #include <asm/arch/stream_id_lsch3.h>
 #include <asm/arch/config.h>
 #include <asm/arch/soc.h>
 
+#define LS1088ARDB_PB_BOARD            0x4A
 /* Link Definitions */
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
+#else
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
 
 /* Link Definitions */
-
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_FSL_QSPI_BASE	0x20000000
+#else
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_SYS_FSL_QSPI_BASE	0x20000000
-#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FSL_QSPI_BASE + \
-						CONFIG_ENV_OFFSET)
+#endif
 #endif
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-#if !defined(CONFIG_SD_BOOT)
-#define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
-#endif
-
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
@@ -64,7 +64,10 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2048 * 1024)
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#endif
+
 
 /* Serial Port */
 #define CONFIG_SYS_NS16550_SERIAL
@@ -144,7 +147,7 @@ unsigned long long get_qixis_addr(void);
  */
 
 #if defined(CONFIG_FSL_MC_ENET)
-#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE		(512UL * 1024 * 1024)
+#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE		(128UL * 1024 * 1024)
 #endif
 /* Command line configuration */
 #define CONFIG_CMD_CACHE
@@ -166,8 +169,6 @@ unsigned long long get_qixis_addr(void);
 /* Physical Memory Map */
 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
 
-#define CONFIG_NR_DRAM_BANKS		2
-
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
@@ -193,29 +194,30 @@ unsigned long long get_qixis_addr(void);
 	"mcinitcmd=fsl_mc start mc 0x580a00000"	\
 	" 0x580e00000 \0"
 
+#ifndef CONFIG_TFABOOT
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_BOOTCOMMAND	"sf probe 0:0;" \
-				"sf read 0x80200000 0xd00000 0x100000;"\
-				" fsl_mc apply dpl 0x80200000 &&" \
+				"sf read 0x80001000 0xd00000 0x100000;"\
+				" fsl_mc lazyapply dpl 0x80001000 &&" \
 				" sf read $kernel_load $kernel_start" \
 				" $kernel_size && bootm $kernel_load"
 #elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND	"mmcinfo;mmc read 0x80200000 0x6800 0x800;"\
-				" fsl_mc apply dpl 0x80200000 &&" \
+#define CONFIG_BOOTCOMMAND	"mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
+				" fsl_mc lazyapply dpl 0x80001000 &&" \
 				" mmc read $kernel_load $kernel_start" \
 				" $kernel_size && bootm $kernel_load"
 #else /* NOR BOOT*/
-#define CONFIG_BOOTCOMMAND	"fsl_mc apply dpl 0x580d00000 &&" \
+#define CONFIG_BOOTCOMMAND	"fsl_mc lazyapply dpl 0x580d00000 &&" \
 				" cp.b $kernel_start $kernel_load" \
 				" $kernel_size && bootm $kernel_load"
 #endif
+#endif /* CONFIG_TFABOOT  */
 #endif
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
 #define CONFIG_SYS_MAXARGS		64	/* max command args */
 
@@ -226,12 +228,11 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SPL_MAX_SIZE            0x16000
 #define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE           0x1800a000
 
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START    0x80200000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE		(16 << 10)
 /*
  * HDR would be appended at end of image and copied to DDR along
@@ -242,7 +243,7 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_MONITOR_LEN         (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN         0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 
 #endif
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */