X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1088a_common.h;h=7d76170bf7698fa34a253b3f367fcdbb21b20279;hb=a29491ade0adf3dbb9dc51be8b45530edde1f1df;hp=2e52108c23e304002b54c3ebbc8991edf2186502;hpb=068415eadefbbc81f14d4ce61fcf7a7eb39650d4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 2e52108..7d76170 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -17,22 +17,14 @@
 #define SPL_NO_SATA
 #define SPL_NO_QSPI
 #define SPL_NO_IFC
-#undef CONFIG_DISPLAY_CPUINFO
 #endif
 
-#define CONFIG_REMAKE_ELF
-
 #include <asm/arch/stream_id_lsch3.h>
 #include <asm/arch/config.h>
 #include <asm/arch/soc.h>
 
 #define LS1088ARDB_PB_BOARD            0x4A
 /* Link Definitions */
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
-#else
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
-#endif
 
 /* Link Definitions */
 #define CONFIG_SYS_FSL_QSPI_BASE	0x20000000
@@ -42,7 +34,6 @@
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_SYS_DDR_BLOCK2_BASE	0x8080000000ULL
-#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS	1
 /*
  * SMP Definitinos
  */
@@ -78,7 +69,7 @@
  * CONFIG_SYS_FLASH_BASE has the final address (core view)
  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
- * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
+ * CONFIG_TEXT_BASE is linked to 0x30000000 for booting
  */
 
 #define CONFIG_SYS_FLASH_BASE			0x580000000ULL
@@ -110,11 +101,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH	0x200000
 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET	0x07000000
 
-/* Define phy_reset function to boot the MC based on mcinitcmd.
- * This happens late enough to properly fixup u-boot env MAC addresses.
- */
-#define CONFIG_RESET_PHY_R
-
 /*
  * Carve out a DDR region which will not be used by u-boot/Linux
  *
@@ -128,25 +114,11 @@ unsigned long long get_qixis_addr(void);
 
 /* Miscellaneous configurable options */
 
-/* SATA */
-#ifdef CONFIG_SCSI
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SATA1		AHCI_BASE_ADDR1
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					CONFIG_SYS_SCSI_MAX_LUN)
-#endif
-
 /* Physical Memory Map */
-#define CONFIG_CHIP_SELECTS_PER_CTRL	4
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
-/* #define CONFIG_DISPLAY_CPUINFO */
-
 #ifndef SPL_NO_ENV
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
@@ -165,23 +137,7 @@ unsigned long long get_qixis_addr(void);
 	" 0x580e00000 \0"
 #endif
 
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
-#define CONFIG_SYS_MAXARGS		64	/* max command args */
-
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_BSS_START_ADDR      0x80100000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x00100000
-#define CONFIG_SPL_MAX_SIZE            0x16000
-#define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
-#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
-#define CONFIG_SYS_SPL_MALLOC_START    0x80200000
-
 #ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE		(16 << 10)
 /*
@@ -196,6 +152,5 @@ unsigned long long get_qixis_addr(void);
 #endif /* ifdef CONFIG_NXP_ESBC */
 
 #endif
-#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 #endif /* __LS1088_COMMON_H */