X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1088a_common.h;h=57429d4bbe32d706fa0108269e1475bf50ddf757;hb=19b4040df03813ffeb3af77d4f44b1b08013bf77;hp=638fc49dca9cec09955440d07556c8205ddfba38;hpb=55dabcc8f24598e2777f663de09ab55fbe1269da;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 638fc49..57429d4 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -17,63 +17,35 @@ #define SPL_NO_SATA #define SPL_NO_QSPI #define SPL_NO_IFC -#undef CONFIG_DISPLAY_CPUINFO #endif -#define CONFIG_REMAKE_ELF - #include #include #include #define LS1088ARDB_PB_BOARD 0x4A /* Link Definitions */ -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) -#endif /* Link Definitions */ -#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000 - -#define CONFIG_SKIP_LOWLEVEL_INIT +#define CFG_SYS_FSL_QSPI_BASE 0x20000000 #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL -#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL -#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL /* * SMP Definitinos */ #define CPU_RELEASE_ADDR secondary_boot_addr -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024) - /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ /* Serial Port */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS) -/* IFC */ -#define CONFIG_FSL_IFC -#endif +#define CFG_SYS_NS16550_CLK (get_bus_freq(0) / 2) /* * During booting, IFC is mapped at the region of 0x30000000. @@ -92,18 +64,18 @@ * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) * * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation. - * CONFIG_SYS_FLASH_BASE has the final address (core view) - * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) - * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address - * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting + * CFG_SYS_FLASH_BASE has the final address (core view) + * CFG_SYS_FLASH_BASE_PHYS has the final address (IFC view) + * CFG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address + * CONFIG_TEXT_BASE is linked to 0x30000000 for booting */ -#define CONFIG_SYS_FLASH_BASE 0x580000000ULL -#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000 -#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 +#define CFG_SYS_FLASH_BASE 0x580000000ULL +#define CFG_SYS_FLASH_BASE_PHYS 0x80000000 +#define CFG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 -#define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000 -#define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 +#define CFG_SYS_FLASH1_BASE_PHYS 0xC0000000 +#define CFG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 #ifndef __ASSEMBLY__ unsigned long long get_qixis_addr(void); @@ -114,23 +86,18 @@ unsigned long long get_qixis_addr(void); #define QIXIS_BASE_PHYS_EARLY 0xC000000 -#define CONFIG_SYS_NAND_BASE 0x530000000ULL -#define CONFIG_SYS_NAND_BASE_PHYS 0x30000000 +#define CFG_SYS_NAND_BASE 0x530000000ULL +#define CFG_SYS_NAND_BASE_PHYS 0x30000000 /* MC firmware */ /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ -#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 -#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 -#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 -#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 -#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 -#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 - -/* Define phy_reset function to boot the MC based on mcinitcmd. - * This happens late enough to properly fixup u-boot env MAC addresses. - */ -#define CONFIG_RESET_PHY_R +#define CFG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 +#define CFG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 +#define CFG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 +#define CFG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 +#define CFG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 +#define CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 /* * Carve out a DDR region which will not be used by u-boot/Linux @@ -140,31 +107,15 @@ unsigned long long get_qixis_addr(void); */ #if defined(CONFIG_FSL_MC_ENET) -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) +#define CFG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) #endif /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) - -/* SATA */ -#ifdef CONFIG_SCSI -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 - -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) -#endif /* Physical Memory Map */ -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 -#define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 -/* #define CONFIG_DISPLAY_CPUINFO */ - #ifndef SPL_NO_ENV /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -181,45 +132,9 @@ unsigned long long get_qixis_addr(void); "console=ttyAMA0,38400n8\0" \ "mcinitcmd=fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" - -#ifndef CONFIG_TFABOOT -#if defined(CONFIG_QSPI_BOOT) -#define CONFIG_BOOTCOMMAND "sf probe 0:0;" \ - "sf read 0x80001000 0xd00000 0x100000;"\ - " fsl_mc lazyapply dpl 0x80001000 &&" \ - " sf read $kernel_load $kernel_start" \ - " $kernel_size && bootm $kernel_load" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\ - " fsl_mc lazyapply dpl 0x80001000 &&" \ - " mmc read $kernel_load $kernel_start" \ - " $kernel_size && bootm $kernel_load" -#else /* NOR BOOT*/ -#define CONFIG_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \ - " cp.b $kernel_start $kernel_load" \ - " $kernel_size && bootm $kernel_load" #endif -#endif /* CONFIG_TFABOOT */ -#endif - -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ #ifdef CONFIG_SPL -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" -#define CONFIG_SPL_MAX_SIZE 0x16000 -#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" - -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 - #ifdef CONFIG_NXP_ESBC #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) /* @@ -228,12 +143,8 @@ unsigned long long get_qixis_addr(void); * size increases then increase this size in case of secure boot as * it uses raw u-boot image instead of fit image. */ -#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) -#else -#define CONFIG_SYS_MONITOR_LEN 0x100000 #endif /* ifdef CONFIG_NXP_ESBC */ #endif -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #endif /* __LS1088_COMMON_H */