X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1046ardb.h;h=fe8108dae037c935c14d3790a0d6e4cb1637ee70;hb=2493ce6258a59881b702cbe255db9e53f1e3fd13;hp=dcb5854046191a1874a8fdd44ef788ce86fd46ec;hpb=f749b61821409772904b8fe7ab62909db82a7c83;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index dcb5854..fe8108d 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor
+ * Copyright 2019 NXP
  */
 
 #ifndef __LS1046ARDB_H__
@@ -24,10 +25,6 @@
 #define CONFIG_DDR_ECC
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
-#define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
-#ifndef CONFIG_SPL
-#define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
-#endif
 
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
@@ -156,30 +153,13 @@
 /*
  * Environment
  */
-#ifndef SPL_NO_ENV
-#define CONFIG_ENV_OVERWRITE
-#endif
-
-#if defined(CONFIG_SD_BOOT)
 #define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
-#define CONFIG_ENV_SIZE			0x2000
-#else
-#define CONFIG_ENV_SIZE			0x2000		/* 8KB */
-#define CONFIG_ENV_OFFSET		0x300000	/* 3MB */
-#define CONFIG_ENV_SECT_SIZE		0x40000		/* 256KB */
-#endif
+#define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
 
 #define AQR105_IRQ_MASK			0x80000000
 /* FMan */
 #ifndef SPL_NO_FMAN
-
-#ifdef CONFIG_NET
-#define CONFIG_PHY_REALTEK
-#endif
-
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
 #define RGMII_PHY1_ADDR			0x1
 #define RGMII_PHY2_ADDR			0x2
 
@@ -195,17 +175,14 @@
 
 #endif
 
-/* QSPI device */
-#ifndef SPL_NO_QSPI
-#ifdef CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH_SPANSION
-#define FSL_QSPI_FLASH_SIZE		(1 << 26)
-#define FSL_QSPI_FLASH_NUM		2
-#endif
-#endif
-
 #ifndef SPL_NO_MISC
 #undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;"
+#else
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
 			   "env exists secureboot && esbc_halt;;"
@@ -214,6 +191,7 @@
 			   "env exists secureboot && esbc_halt;"
 #endif
 #endif
+#endif
 
 #include <asm/fsl_secure_boot.h>