X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1046ardb.h;h=8ed1dceb234371e658ded68998c42a465cb97ce0;hb=0f9595b9fa68ed1634adddf989fd037909eec433;hp=f22e863749b0ae6f6577e0ad5ffbbae844c88e9f;hpb=e102f74d659d5a71b5378f8a85df72bc1a7fee96;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index f22e863..8ed1dce 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor
+ * Copyright 2019 NXP
  */
 
 #ifndef __LS1046ARDB_H__
@@ -8,49 +9,22 @@
 
 #include "ls1046a_common.h"
 
-#define CONFIG_SYS_CLK_FREQ		100000000
-#define CONFIG_DDR_CLK_FREQ		100000000
-
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 /* Physical Memory Map */
 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
 
-#define CONFIG_DDR_SPD
 #define SPD_EEPROM_ADDRESS		0x51
 #define CONFIG_SYS_SPD_BUS_NUM		0
 
-#define CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
-#ifdef CONFIG_EMMC_BOOT
-#define CONFIG_SYS_FSL_PBL_RCW \
-	board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg
-#else
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg
-#endif
-#elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_FSL_PBL_RCW \
-	board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg
-#define CONFIG_SYS_FSL_PBL_PBI \
-	board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg
+#if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_SYS_UBOOT_BASE		0x40100000
 #define CONFIG_SYS_SPL_ARGS_ADDR	0x90000000
 #endif
 
-#ifndef SPL_NO_IFC
-/* IFC */
-#define CONFIG_FSL_IFC
-/*
- * NAND Flash Definitions
- */
-#define CONFIG_NAND_FSL_IFC
-#endif
-
 #define CONFIG_SYS_NAND_BASE		0x7e800000
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
 
@@ -68,8 +42,6 @@
 				| CSOR_NAND_SPRZ_224	/* Spare size = 224 */ \
 				| CSOR_NAND_PB(64))	/* 64 Pages Per Block */
 
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x7) | \
 					FTIM0_NAND_TWP(0x18)   | \
 					FTIM0_NAND_TWCHT(0x7) | \
@@ -87,8 +59,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-
 /*
  * CPLD
  */
@@ -134,56 +104,21 @@
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_CPLD_FTIM3
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM		0
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x53
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 #define I2C_RETIMER_ADDR			0x18
 
 /* PMIC */
-#define CONFIG_POWER
-#ifdef CONFIG_POWER
-#define CONFIG_POWER_I2C
-#endif
 
 /*
  * Environment
  */
-#ifndef SPL_NO_ENV
-#define CONFIG_ENV_OVERWRITE
-#endif
-
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_MMC_ENV_DEV		0
-
-#define CONFIG_ENV_SIZE			0x2000		/* 8KB */
-#define CONFIG_ENV_OFFSET		0x500000	/* 5MB */
-#define CONFIG_ENV_SECT_SIZE		0x40000		/* 256KB */
-#else
-#if defined(CONFIG_SD_BOOT)
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
-#define CONFIG_ENV_SIZE			0x2000
-#else
-#define CONFIG_ENV_SIZE			0x2000		/* 8KB */
-#define CONFIG_ENV_OFFSET		0x300000	/* 3MB */
-#define CONFIG_ENV_SECT_SIZE		0x40000		/* 256KB */
-#endif
-#endif
+#define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
 
 #define AQR105_IRQ_MASK			0x80000000
 /* FMan */
 #ifndef SPL_NO_FMAN
-
-#ifdef CONFIG_NET
-#define CONFIG_PHY_REALTEK
-#endif
-
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
 #define RGMII_PHY1_ADDR			0x1
 #define RGMII_PHY2_ADDR			0x2
 
@@ -199,30 +134,12 @@
 
 #endif
 
-/* QSPI device */
-#ifndef SPL_NO_QSPI
-#ifdef CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH_SPANSION
-#define FSL_QSPI_FLASH_SIZE		(1 << 26)
-#define FSL_QSPI_FLASH_NUM		2
-#endif
-#endif
-
 #ifndef SPL_NO_MISC
-#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
 			   "env exists secureboot && esbc_halt;;"
 #define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; "	\
 			   "env exists secureboot && esbc_halt;"
-#else
-#if defined(CONFIG_QSPI_BOOT)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
-			   "env exists secureboot && esbc_halt;;"
-#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; "	\
-			   "env exists secureboot && esbc_halt;"
-#endif
 #endif
 #endif