X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1046aqds.h;h=9ff248cefad1cb1b3353690ecf968220e4e1bd90;hb=b9da77f1958aab4ec50ff2f095b40464ca2489dd;hp=58dd9fb1a17b8668190947cb2b5c58d142c19086;hpb=d32519ac8a4483803975b5aa4ef4f5affe1964bc;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 58dd9fb..9ff248c 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -52,10 +52,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
-#define CONFIG_PHY_VITESSE
-#define CONFIG_PHY_REALTEK
-#define CONFIG_PHYLIB_10G
 #define RGMII_PHY1_ADDR		0x1
 #define RGMII_PHY2_ADDR		0x2
 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
@@ -430,27 +426,10 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_TFABOOT
 #define CONFIG_SYS_MMC_ENV_DEV		0
-
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_OFFSET		0x500000        /* 5MB */
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x500000)
-#define CONFIG_ENV_SECT_SIZE		0x20000
 #else
 #ifdef CONFIG_NAND_BOOT
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_OFFSET		(12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_SIZE			0x2000
-#elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_ENV_SIZE			0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
-#define CONFIG_ENV_SECT_SIZE		0x10000
-#else
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
-#define CONFIG_ENV_SECT_SIZE		0x20000
-#define CONFIG_ENV_SIZE			0x20000
 #endif
 #endif
 
@@ -458,19 +437,27 @@ unsigned long get_board_ddr_clk(void);
 
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
-#define QSPI_NOR_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
-					"e0000 f00000 && bootm $kernel_load"
-#define IFC_NOR_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
-					"$kernel_size && bootm $kernel_load"
-#define SD_BOOTCOMMAND		"mmc info; mmc read $kernel_load"     \
-					"$kernel_addr_sd $kernel_size_sd && bootm $kernel_load"
+#define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd"	\
+			   "env exists secureboot && esbc_halt;;"
+#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
 #else
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
-					"e0000 f00000 && bootm $kernel_load"
+#if defined(CONFIG_QSPI_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#elif defined(CONFIG_NAND_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
 #else
-#define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
-					"$kernel_size && bootm $kernel_load"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
 #endif
 #endif