X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1046aqds.h;h=6f96b9cae510160f38c7c0d052103c779e0640bf;hb=df6cf3d809fe543651e6bdf133baaa8b9841fe0f;hp=9ff248cefad1cb1b3353690ecf968220e4e1bd90;hpb=04da42770b0cc3bea8841972bfc9568299ece826;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 9ff248c..6f96b9c 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -10,13 +10,9 @@
 
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(void);
-unsigned long get_board_ddr_clk(void);
 #endif
 
 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
-#define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
 
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 
@@ -24,13 +20,10 @@ unsigned long get_board_ddr_clk(void);
 /* Physical Memory Map */
 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
 
-#define CONFIG_DDR_SPD
 #define SPD_EEPROM_ADDRESS		0x51
 #define CONFIG_SYS_SPD_BUS_NUM		0
 
-#define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #endif
 
@@ -41,16 +34,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPI_FLASH_EON		/* cs2 */
 #endif
 
-/* QSPI */
-#if defined(CONFIG_TFABOOT) ||	\
-	defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#ifdef CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH_SPANSION
-#define FSL_QSPI_FLASH_SIZE		(1 << 24)
-#define FSL_QSPI_FLASH_NUM		2
-#endif
-#endif
-
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define RGMII_PHY1_ADDR		0x1
 #define RGMII_PHY2_ADDR		0x2
@@ -65,26 +48,6 @@ unsigned long get_board_ddr_clk(void);
 #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
 #endif
 
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI \
-	board/freescale/ls1046aqds/ls1046aqds_pbi.cfg
-#endif
-
-#ifdef CONFIG_NAND_BOOT
-#define CONFIG_SYS_FSL_PBL_RCW \
-	board/freescale/ls1046aqds/ls1046aqds_rcw_nand.cfg
-#endif
-
-#ifdef CONFIG_SD_BOOT
-#ifdef CONFIG_SD_BOOT_QSPI
-#define CONFIG_SYS_FSL_PBL_RCW \
-	board/freescale/ls1046aqds/ls1046aqds_rcw_sd_qspi.cfg
-#else
-#define CONFIG_SYS_FSL_PBL_RCW \
-	board/freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg
-#endif
-#endif
-
 /* IFC */
 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 #define	CONFIG_FSL_IFC
@@ -113,13 +76,8 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM		0
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 
 /*
  * IFC Definitions
@@ -219,7 +177,6 @@ unsigned long get_board_ddr_clk(void);
 #if defined(CONFIG_TFABOOT) || \
 	defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_QIXIS_I2C_ACCESS
-#define CONFIG_SYS_I2C_EARLY_INIT
 #endif
 
 /*
@@ -409,9 +366,6 @@ unsigned long get_board_ddr_clk(void);
  * Miscellaneous configurable options
  */
 
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
-
 #define CONFIG_SYS_HZ			1000
 
 #define CONFIG_SYS_INIT_SP_OFFSET \
@@ -422,16 +376,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Environment
  */
-#define CONFIG_ENV_OVERWRITE
-
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#else
-#ifdef CONFIG_NAND_BOOT
-#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#endif
-#endif
 
 #define CONFIG_CMDLINE_TAG