X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1043ardb.h;h=d36b2c7e557b2825b019276b436a1d37fec96eb4;hb=b8e09898919e23c5d7f1934be7bf9a3a6f0deb0e;hp=f7b110cffcf88fa98803eb2c768422166173a23b;hpb=9a0cbae22a613dfd55e15565785749b74c19fdf0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index f7b110c..d36b2c7 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -8,40 +8,12 @@
 
 #include "ls1043a_common.h"
 
-#define CONFIG_SYS_CLK_FREQ		100000000
-#define CONFIG_DDR_CLK_FREQ		100000000
-
-#define CONFIG_LAYERSCAPE_NS_ACCESS
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
 /* Physical Memory Map */
-#define CONFIG_CHIP_SELECTS_PER_CTRL	4
-
-#define CONFIG_SYS_SPD_BUS_NUM		0
 
 #ifndef CONFIG_SPL
-#define CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #endif
 
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043ardb/ls1043ardb_pbi.cfg
-#endif
-
-#ifdef CONFIG_NAND_BOOT
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg
-#endif
-
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
-#define CONFIG_CMD_SPL
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x90000000
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x10000
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x500
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	30
-#endif
-
 /*
  * NOR Flash Definitions
  */
@@ -70,23 +42,13 @@
 #define CONFIG_SYS_NOR_FTIM3		0
 #define CONFIG_SYS_IFC_CCR		0x01000000
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE_PHYS }
 
-#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 
 /*
  * NAND Flash Definitions
  */
-#ifndef SPL_NO_IFC
-#define CONFIG_NAND_FSL_IFC
-#endif
 
 #define CONFIG_SYS_NAND_BASE		0x7e800000
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
@@ -105,8 +67,6 @@
 				| CSOR_NAND_SPRZ_64	/* Spare size = 64 */ \
 				| CSOR_NAND_PB(64))	/* 64 Pages Per Block */
 
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x7) | \
 					FTIM0_NAND_TWP(0x18)   | \
 					FTIM0_NAND_TWCHT(0x7) | \
@@ -124,11 +84,7 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-
 #ifdef CONFIG_NAND_BOOT
-#define CONFIG_SPL_PAD_TO		0x20000		/* block aligned */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(1024 << 10)
 #endif
 
@@ -229,40 +185,18 @@
 
 /* EEPROM */
 #ifndef SPL_NO_EEPROM
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM		0
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x53
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 #endif
 
 /*
  * Environment
  */
-#ifndef SPL_NO_ENV
-#define CONFIG_ENV_OVERWRITE
-#endif
-
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#else
-#if defined(CONFIG_NAND_BOOT)
-#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#endif
-#endif
 
 /* FMan */
 #ifndef SPL_NO_FMAN
 #define AQR105_IRQ_MASK			0x40000000
 
-#ifdef CONFIG_NET
-#define CONFIG_PHY_VITESSE
-#define CONFIG_PHY_REALTEK
-#endif
-
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define RGMII_PHY1_ADDR			0x1
 #define RGMII_PHY2_ADDR			0x2
@@ -273,20 +207,11 @@
 #define QSGMII_PORT4_PHY_ADDR		0x7
 
 #define FM1_10GEC1_PHY_ADDR		0x1
-
-#define CONFIG_ETHPRIME			"FM1@DTSEC3"
 #endif
 #endif
 
 /* SATA */
 #ifndef SPL_NO_SATA
-#ifndef CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT2
-#endif
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		2
-#define CONFIG_SYS_SCSI_MAX_LUN			2
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 #define SCSI_VEND_ID 0x1b4b
 #define SCSI_DEV_ID  0x9170
 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}