X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1043ardb.h;h=5e570cd5e8d70ef23133d9efee09c7d808661b53;hb=be62fbf376261ab3a4ed5db3bf54d5df9e216d9f;hp=f4fb2501ab2df05f5a64fc3dc78956c9d5c6ccff;hpb=bd42a94268b165a6f298b9ab13be7003e8d96b02;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index f4fb250..5e570cd 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -29,7 +29,9 @@
 #define CONFIG_SYS_SPD_BUS_NUM		0
 
 #define CONFIG_FSL_DDR_BIST
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
+#endif
 #define CONFIG_SYS_DDR_RAW_TIMING
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
@@ -88,7 +90,9 @@
 /*
  * NAND Flash Definitions
  */
+#ifndef SPL_NO_IFC
 #define CONFIG_NAND_FSL_IFC
+#endif
 
 #define CONFIG_SYS_NAND_BASE		0x7e800000
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
@@ -132,7 +136,7 @@
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SPL_PAD_TO		0x20000		/* block aligned */
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(1024 << 10)
 #endif
 
 /*
@@ -211,6 +215,7 @@
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_CPLD_FTIM3
 
 /* EEPROM */
+#ifndef SPL_NO_EEPROM
 #define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM		0
@@ -218,11 +223,14 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#endif
 
 /*
  * Environment
  */
+#ifndef SPL_NO_ENV
 #define CONFIG_ENV_OVERWRITE
+#endif
 
 #if defined(CONFIG_NAND_BOOT)
 #define CONFIG_ENV_IS_IN_NAND
@@ -241,6 +249,7 @@
 #endif
 
 /* FMan */
+#ifndef SPL_NO_FMAN
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_FMAN_ENET
 #define CONFIG_PHYLIB
@@ -264,23 +273,29 @@
 
 #define CONFIG_ETHPRIME			"FM1@DTSEC3"
 #endif
+#endif
 
 /* QE */
+#ifndef SPL_NO_QE
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 	!defined(CONFIG_QSPI_BOOT)
 #define CONFIG_U_QE
 #endif
 #define CONFIG_SYS_QE_FW_ADDR     0x60600000
+#endif
 
 /* USB */
+#ifndef SPL_NO_USB
 #define CONFIG_HAS_FSL_XHCI_USB
 #ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		3
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
 #endif
+#endif
 
 /* SATA */
+#ifndef SPL_NO_SATA
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_CMD_SCSI
@@ -297,9 +312,7 @@
 #define SCSI_VEND_ID 0x1b4b
 #define SCSI_DEV_ID  0x9170
 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
-
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_GPT
+#endif
 
 #include <asm/fsl_secure_boot.h>