X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1043ardb.h;h=0d071c4ab748535605a40e99822048fb8fdbdd6a;hb=166a77b34b30f64f7b12a3016b0bba49d568c52e;hp=f7b110cffcf88fa98803eb2c768422166173a23b;hpb=c59afcff8a4ef087136e8a0ad7e2c587c32baf51;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index f7b110c..0d071c4 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -9,7 +9,6 @@
 #include "ls1043a_common.h"
 
 #define CONFIG_SYS_CLK_FREQ		100000000
-#define CONFIG_DDR_CLK_FREQ		100000000
 
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 
@@ -21,21 +20,10 @@
 
 #ifndef CONFIG_SPL
 #define CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #endif
 
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043ardb/ls1043ardb_pbi.cfg
-#endif
-
-#ifdef CONFIG_NAND_BOOT
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg
-#endif
-
 #ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
-#define CONFIG_CMD_SPL
 #define CONFIG_SYS_SPL_ARGS_ADDR	0x90000000
 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x10000
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x500
@@ -84,9 +72,6 @@
 /*
  * NAND Flash Definitions
  */
-#ifndef SPL_NO_IFC
-#define CONFIG_NAND_FSL_IFC
-#endif
 
 #define CONFIG_SYS_NAND_BASE		0x7e800000
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
@@ -105,8 +90,6 @@
 				| CSOR_NAND_SPRZ_64	/* Spare size = 64 */ \
 				| CSOR_NAND_PB(64))	/* 64 Pages Per Block */
 
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x7) | \
 					FTIM0_NAND_TWP(0x18)   | \
 					FTIM0_NAND_TWCHT(0x7) | \
@@ -124,11 +107,8 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SPL_PAD_TO		0x20000		/* block aligned */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(1024 << 10)
 #endif
 
@@ -229,40 +209,18 @@
 
 /* EEPROM */
 #ifndef SPL_NO_EEPROM
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM		0
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x53
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 #endif
 
 /*
  * Environment
  */
-#ifndef SPL_NO_ENV
-#define CONFIG_ENV_OVERWRITE
-#endif
-
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#else
-#if defined(CONFIG_NAND_BOOT)
-#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#endif
-#endif
 
 /* FMan */
 #ifndef SPL_NO_FMAN
 #define AQR105_IRQ_MASK			0x40000000
 
-#ifdef CONFIG_NET
-#define CONFIG_PHY_VITESSE
-#define CONFIG_PHY_REALTEK
-#endif
-
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define RGMII_PHY1_ADDR			0x1
 #define RGMII_PHY2_ADDR			0x2
@@ -280,9 +238,6 @@
 
 /* SATA */
 #ifndef SPL_NO_SATA
-#ifndef CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT2
-#endif
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		2
 #define CONFIG_SYS_SCSI_MAX_LUN			2
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \