X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1043aqds.h;h=0897da1998d2192c10a693d03dfddae1ece0bce9;hb=19d1f1a2f3ccfbf85125150f7876ce22714b38bd;hp=b18fcc0c2f5b0695a590e2d3a7cfd4a4ceccb435;hpb=f534b8f5fdabfbe47c9c741864ed52e945afbd27;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index b18fcc0..0897da1 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -9,13 +9,10 @@
 
 #include "ls1043a_common.h"
 
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
 #define CONFIG_SYS_TEXT_BASE		0x82000000
 #elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_TEXT_BASE		0x40010000
+#define CONFIG_SYS_TEXT_BASE		0x40100000
 #else
 #define CONFIG_SYS_TEXT_BASE		0x60100000
 #endif
@@ -41,9 +38,8 @@ unsigned long get_board_ddr_clk(void);
 #define SPD_EEPROM_ADDRESS		0x51
 #define CONFIG_SYS_SPD_BUS_NUM		0
 
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
-#ifndef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDR3		/* Use DDR3 memory */
 #endif
 
 #define CONFIG_DDR_ECC
@@ -102,9 +98,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SCSI
-#define CONFIG_DOS_PARTITION
-#define CONFIG_BOARD_LATE_INIT
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
@@ -220,7 +213,6 @@ unsigned long get_board_ddr_clk(void);
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_QIXIS_I2C_ACCESS
 #define CONFIG_SYS_I2C_EARLY_INIT
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 /*
@@ -385,7 +377,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
 #endif
 
 /*
@@ -403,12 +394,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_HZ			1000
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(30 * 1024)
-
 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
@@ -424,22 +409,18 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_NAND_BOOT
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_OFFSET		(10 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_OFFSET		(24 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET		(1024 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_SIZE			0x2000
 #elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE			0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET		0x100000        /* 1MB */
+#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE		0x10000
 #else
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE		0x20000
 #define CONFIG_ENV_SIZE			0x20000
 #endif