X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1043a_common.h;h=8363969d557cf96e08ad6c8942abd9d60ca3c327;hb=a331017c237c7da159a1657984250d656ed1c487;hp=fb697bdf1301a502275f69e9dcbcde9008caff9d;hpb=67e6c540a098ee5ecb3fdf0b332d9a63b00fdbd7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index fb697bd..8363969 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -26,17 +26,10 @@
 #define SPL_NO_IFC
 #endif
 
-#define CONFIG_REMAKE_ELF
-
 #include <asm/arch/stream_id_lsch2.h>
 #include <asm/arch/config.h>
 
 /* Link Definitions */
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
-#else
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
-#endif
 
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
@@ -46,9 +39,6 @@
 
 #define CPU_RELEASE_ADDR               secondary_boot_addr
 
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		25000000	/* 25MHz */
-
 /* Serial Port */
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -56,17 +46,6 @@
 
 /* SD boot SPL */
 #ifdef CONFIG_SD_BOOT
-
-#define CONFIG_SPL_MAX_SIZE		0x17000
-#define CONFIG_SPL_STACK		0x1001e000
-#define CONFIG_SPL_PAD_TO		0x1d000
-
-#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
-					CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-#define CONFIG_SPL_BSS_START_ADDR	0x8f000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-
 #ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
 /*
@@ -83,15 +62,8 @@
 
 /* NAND SPL */
 #ifdef CONFIG_NAND_BOOT
-#define CONFIG_SPL_PBL_PAD
-#define CONFIG_SPL_MAX_SIZE		0x1a000
-#define CONFIG_SPL_STACK		0x1001d000
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_SPL_MALLOC_START	0x80200000
-#define CONFIG_SPL_BSS_START_ADDR	0x80100000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
 #ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
@@ -112,17 +84,11 @@
 #endif
 
 /* GPIO */
-#ifdef CONFIG_DM_GPIO
-#ifndef CONFIG_MPC8XXX_GPIO
-#define CONFIG_MPC8XXX_GPIO
-#endif
-#endif
 
 /* IFC */
 #ifndef SPL_NO_IFC
 #if defined(CONFIG_TFABOOT) || \
 	(!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI))
-#define CONFIG_FSL_IFC
 /*
  * CONFIG_SYS_FLASH_BASE has the final address (core view)
  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
@@ -154,13 +120,6 @@
 #endif
 
 /*  DSPI  */
-#ifndef SPL_NO_DSPI
-#ifdef CONFIG_FSL_DSPI
-#define CONFIG_SPI_FLASH_STMICRO	/* cs0 */
-#define CONFIG_SPI_FLASH_SST		/* cs1 */
-#define CONFIG_SPI_FLASH_EON		/* cs2 */
-#endif
-#endif
 
 /* FMan ucode */
 #ifndef SPL_NO_FMAN
@@ -168,32 +127,6 @@
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
 
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_FMAN_FW_ADDR		0x900000
-#define CONFIG_SYS_QE_FW_ADDR		0x940000
-
-
-#else
-#ifdef CONFIG_NAND_BOOT
-/* Store Fman ucode at offeset 0x900000(72 blocks). */
-#define CONFIG_SYS_FMAN_FW_ADDR		(72 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#elif defined(CONFIG_SD_BOOT)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2040 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800).
- */
-#define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x4800)
-#define CONFIG_SYS_QE_FW_ADDR		(512 * 0x4A00)
-#elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_FMAN_FW_ADDR		0x40900000
-#else
-/* FMan fireware Pre-load address */
-#define CONFIG_SYS_FMAN_FW_ADDR		0x60900000
-#define CONFIG_SYS_QE_FW_ADDR		0x60940000
-#endif
-#endif
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif
 #endif
@@ -204,20 +137,17 @@
 #define HWCONFIG_BUFFER_SIZE		128
 
 #ifndef SPL_NO_MISC
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(USB, usb, 0) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
-#endif
 
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
 	"fdt_high=0xffffffffffffffff\0"		\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"fdt_addr=0x64f00000\0"			\
 	"kernel_addr=0x61000000\0"		\
 	"scriptaddr=0x80000000\0"		\
 	"scripthdraddr=0x80080000\0"		\
@@ -237,7 +167,6 @@
 	"kernelhdr_size_sd=0x10\0"		\
 	"console=ttyS0,115200\0"		\
 	"boot_os=y\0"				\
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
 	BOOTENV					\
 	"boot_scripts=ls1043ardb_boot.scr\0"	\
 	"boot_script_hdr=hdr_ls1043ardb_bs.out\0"	\
@@ -287,7 +216,6 @@
 		"bootm $load_addr#$board\0"
 
 
-#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
 			   "env exists secureboot && esbc_halt;"
@@ -297,24 +225,8 @@
 			   "env exists secureboot && esbc_halt;"
 #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "	\
 			   "env exists secureboot && esbc_halt;"
-#else
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
-			   "env exists secureboot && esbc_halt;"
-#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "  \
-			   "env exists secureboot && esbc_halt;"
-#else
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
-			   "env exists secureboot && esbc_halt;"
 #endif
 #endif
-#endif
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-
-#define CONFIG_SYS_MAXARGS		64	/* max command args */
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */