X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1028ardb.h;h=e7b2543b7301865dadc48706ff57b318924f6542;hb=a29491ade0adf3dbb9dc51be8b45530edde1f1df;hp=e6f38f5d00ef6e0be1c4cf0b454eba993584b0f1;hpb=c8f8830e0bae17f1163de6d413d0553ba5a67416;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index e6f38f5..e7b2543 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019 NXP
+ * Copyright 2019, 2021 NXP
  */
 
 #ifndef __LS1028A_RDB_H
@@ -8,24 +8,15 @@
 
 #include "ls1028a_common.h"
 
-#define CONFIG_SYS_CLK_FREQ		100000000
-#define CONFIG_DDR_CLK_FREQ		100000000
-#define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ / 4)
+#define COUNTER_FREQUENCY_REAL		(get_board_sys_clk() / 4)
 
 #define CONFIG_SYS_RTC_BUS_NUM         0
 
 /* Store environment at top of flash */
 
-#define CONFIG_DIMM_SLOTS_PER_CTLR          1
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_QIXIS_I2C_ACCESS
-
 /*
  * QIXIS Definitions
  */
-#define CONFIG_FSL_QIXIS
 
 #ifdef CONFIG_FSL_QIXIS
 #define QIXIS_BASE			0x7fb00000
@@ -59,15 +50,9 @@
 #endif
 
 /* SATA */
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 #define SCSI_VEND_ID 0x1b4b
 #define SCSI_DEV_ID  0x9170
 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
 
 /* Initial environment variables */
 #ifndef SPL_NO_ENV
@@ -78,7 +63,6 @@
 	"ramdisk_addr=0x800000\0"		\
 	"ramdisk_size=0x2000000\0"		\
 	"bootm_size=0x10000000\0"		\
-	"fdt_addr=0x00f00000\0"                 \
 	"kernel_addr=0x01000000\0"              \
 	"scriptaddr=0x80000000\0"               \
 	"scripthdraddr=0x80080000\0"		\
@@ -98,7 +82,6 @@
 	"kernelhdr_addr_sd=0x3000\0"		\
 	"kernelhdr_size_sd=0x20\0"		\
 	"console=ttyS0,115200\0"                \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
 	BOOTENV					\
 	"boot_scripts=ls1028ardb_boot.scr\0"    \
 	"boot_script_hdr=hdr_ls1028ardb_bs.out\0"	\
@@ -112,13 +95,6 @@
 			"run scan_dev_for_boot; "            \
 		  "fi; "                                   \
 		"done\0"                                   \
-	"scan_dev_for_boot="				  \
-		"echo Scanning ${devtype} "		  \
-				"${devnum}:${distro_bootpart}...; "  \
-		"for prefix in ${boot_prefixes}; do "	  \
-			"run scan_dev_for_scripts; "	  \
-		"done;"					  \
-		"\0"					  \
 	"boot_a_script="				  \
 		"load ${devtype} ${devnum}:${distro_bootpart} "  \
 			"${scriptaddr} ${prefix}${script}; "    \