X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1028ardb.h;h=1a80cb945dfb5329e2b346f6237f6fc518fd5082;hb=f9a48654ee70fbad29f487d074fd36a1548b4209;hp=b77c36d2798ed0af4ca9f2faf799cd695853d74d;hpb=954cd7882857c64158de8d90660f490b0b136b7a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index b77c36d..1a80cb9 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -15,7 +15,6 @@
 #define CONFIG_SYS_RTC_BUS_NUM         0
 
 /* Store environment at top of flash */
-#define CONFIG_ENV_SIZE			0x2000
 
 #define CONFIG_DIMM_SLOTS_PER_CTLR          1
 
@@ -39,10 +38,10 @@
 #define QIXIS_LBMAP_ALTBANK		0x00
 #define QIXIS_LBMAP_SD			0x00
 #define QIXIS_LBMAP_EMMC		0x00
-#define QIXIS_LBMAP_QSPI		0x00
+#define QIXIS_LBMAP_XSPI		0x00
 #define QIXIS_RCW_SRC_SD		0xf8
 #define QIXIS_RCW_SRC_EMMC		0xf9
-#define QIXIS_RCW_SRC_QSPI		0xff
+#define QIXIS_RCW_SRC_XSPI		0xff
 #define QIXIS_RST_CTL_RESET		0x31
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x10
 #define QIXIS_RCFG_CTL_RECONFIG_START	0x11
@@ -60,9 +59,6 @@
 #endif
 
 /* SATA */
-#ifndef CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT2
-#endif
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
 #define CONFIG_SYS_SCSI_MAX_LUN			1
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
@@ -73,4 +69,85 @@
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
 
+/* Initial environment variables */
+#ifndef SPL_NO_ENV
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"board=ls1028ardb\0"			\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"ramdisk_addr=0x800000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"bootm_size=0x10000000\0"		\
+	"fdt_addr=0x00f00000\0"                 \
+	"kernel_addr=0x01000000\0"              \
+	"scriptaddr=0x80000000\0"               \
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"         \
+	"kernelheader_addr_r=0x80200000\0"      \
+	"load_addr=0xa0000000\0"            \
+	"kernel_addr_r=0x81000000\0"            \
+	"fdt_addr_r=0x90000000\0"               \
+	"ramdisk_addr_r=0xa0000000\0"           \
+	"kernel_start=0x1000000\0"		\
+	"kernelheader_start=0x600000\0"		\
+	"kernel_load=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernel_size_sd=0x14000\0"		\
+	"kernelhdr_addr_sd=0x3000\0"		\
+	"kernelhdr_size_sd=0x20\0"		\
+	"console=ttyS0,115200\0"                \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
+	BOOTENV					\
+	"boot_scripts=ls1028ardb_boot.scr\0"    \
+	"boot_script_hdr=hdr_ls1028ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="               \
+		"part list ${devtype} ${devnum} devplist; "   \
+		"env exists devplist || setenv devplist 1; "  \
+		"for distro_bootpart in ${devplist}; do "     \
+		  "if fstype ${devtype} "                  \
+			"${devnum}:${distro_bootpart} "      \
+			"bootfstype; then "                  \
+			"run scan_dev_for_boot; "            \
+		  "fi; "                                   \
+		"done\0"                                   \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+		"sf probe 0:0 && sf read $load_addr " \
+		"$kernel_start $kernel_size ; env exists secureboot &&" \
+		"sf read $kernelheader_addr_r $kernelheader_start " \
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$board\0" \
+	"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+		"&& hdp load $load_addr 0x2000\0"			\
+	"sd_bootcmd=echo Trying load from SD ...;" \
+		"mmc dev 0;mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"env exists secureboot && mmc read $kernelheader_addr_r " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"		\
+	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"	\
+		"mmc dev 0;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"	\
+	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
+		"mmc dev 1;mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"env exists secureboot && mmc read $kernelheader_addr_r " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"			\
+	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"
+#endif
 #endif /* __LS1028A_RDB_H */