X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1028a_common.h;h=b104524becb1454e2483ec02d5f7e2c6510f1fee;hb=c45568cc4e51b7bbe2f3ce28d8f2566048aeebf3;hp=e413ebacfd1d30f75557caa54e876fdd35be965c;hpb=49c8ef0e45a91ec894ef15e7d043dafe8f1c5efd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index e413eba..b104524 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -6,17 +6,11 @@
 #ifndef __L1028A_COMMON_H
 #define __L1028A_COMMON_H
 
-#define CONFIG_REMAKE_ELF
-#define CONFIG_MP
-
 #include <asm/arch/stream_id_lsch3.h>
 #include <asm/arch/config.h>
 #include <asm/arch/soc.h>
 
 /* Link Definitions */
-#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
 
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
@@ -30,18 +24,7 @@
  */
 #define CPU_RELEASE_ADDR		secondary_boot_addr
 
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		25000000	/* 25MHz */
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2048 * 1024)
-
 /* GPIO */
-#ifdef CONFIG_DM_GPIO
-#ifndef CONFIG_MPC8XXX_GPIO
-#define CONFIG_MPC8XXX_GPIO
-#endif
-#endif
 
 /* I2C */
 
@@ -50,12 +33,9 @@
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /* Miscellaneous configurable options */
 
 /* Physical Memory Map */
-#define CONFIG_CHIP_SELECTS_PER_CTRL	4
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
@@ -67,8 +47,6 @@
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
-#undef CONFIG_BOOTCOMMAND
-
 #define XSPI_NOR_BOOTCOMMAND	\
 	"run xspi_hdploadcmd; run distro_bootcmd; run xspi_bootcmd; " \
 	"env exists secureboot && esbc_halt;;"
@@ -79,21 +57,9 @@
 	"run emmc_hdploadcmd; run distro_bootcmd;run emmc_bootcmd; " \
 	"env exists secureboot && esbc_halt;"
 
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
-
-#define CONFIG_SYS_MAXARGS		64	/* max command args */
-
-#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
-
 #define OCRAM_NONSECURE_SIZE		0x00010000
 #define CONFIG_SYS_FSL_QSPI_BASE	0x20000000
 
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
 /* I2C bus multiplexer */
 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 #define I2C_MUX_CH_DEFAULT              0x8
@@ -109,8 +75,4 @@
 #include <asm/fsl_secure_boot.h>
 #endif
 
-/* Ethernet */
-/* smallest ENETC BD ring has 8 entries */
-#define CONFIG_SYS_RX_ETH_BUFFER		8
-
 #endif /* __L1028A_COMMON_H */