X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1021atwr.h;h=b2e431a1c903ba3dea544fd20bb48d23b38f1398;hb=e16e137c377c8b96d8d91263d0b6d8470169f841;hp=6af748d6ac27ff525eb9f618ea754dd7170b2169;hpb=18fb0e3cae64b03c51db7ba8b607e9031a844b99;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 6af748d..b2e431a 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -266,13 +266,13 @@
  * Serial Port
  */
 #ifdef CONFIG_LPUART
-#define CONFIG_FSL_LPUART
 #define CONFIG_LPUART_32B_REG
 #else
 #define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
+#endif
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #endif
 
@@ -289,7 +289,6 @@
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 
 /* EEPROM */
-#ifndef CONFIG_SD_BOOT
 #define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM		1
@@ -297,7 +296,6 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
-#endif
 
 /*
  * MMC
@@ -313,15 +311,11 @@
 /* SPI */
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 /* QSPI */
-#define CONFIG_FSL_QSPI
 #define QSPI0_AMBA_BASE			0x40000000
 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
 #define FSL_QSPI_FLASH_NUM		2
-#define CONFIG_SPI_FLASH_STMICRO
 
 /* DSPI */
-#define CONFIG_FSL_DSPI
-#define CONFIG_SPI_FLASH_ATMEL
 #endif
 
 /* DM SPI */
@@ -342,6 +336,7 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 #define CONFIG_FSL_DCU_SII9022A
 #define CONFIG_SYS_I2C_DVI_BUS_NUM	1
@@ -428,7 +423,7 @@
 #define CONFIG_ARMV7_NONSEC
 #define CONFIG_ARMV7_VIRT
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
-#define CONFIG_LS102XA_NS_ACCESS
+#define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
 #define CONFIG_TIMER_CLK_FREQ		12500000
 
@@ -442,13 +437,13 @@
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
 	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
-	"initrd_high=0xcfffffff\0"      \
-	"fdt_high=0xcfffffff\0"
+	"initrd_high=0xffffffff\0"      \
+	"fdt_high=0xffffffff\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-	"initrd_high=0xcfffffff\0"      \
-	"fdt_high=0xcfffffff\0"
+	"initrd_high=0xffffffff\0"      \
+	"fdt_high=0xffffffff\0"
 #endif
 
 /*
@@ -515,20 +510,17 @@
 #define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
 #endif
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
 #define CONFIG_CMD_BOOTZ
 
 #define CONFIG_MISC_INIT_R
 
 /* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
 #define CONFIG_SHA_HW_ACCEL
+#endif
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
 #include <asm/fsl_secure_boot.h>
-#endif
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
 
 #endif