X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1021atwr.h;h=b2e431a1c903ba3dea544fd20bb48d23b38f1398;hb=e16e137c377c8b96d8d91263d0b6d8470169f841;hp=3299a9f593ee692ca7765906a4859552a2e446ec;hpb=14e7a30f2e8963fc5b91ba68e53bb2de708aee65;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 3299a9f..b2e431a 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -11,7 +11,7 @@
 
 #define CONFIG_ARMV7_PSCI
 
-#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -109,7 +109,13 @@
 #endif
 
 #ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_FSL_PBL_RCW	board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
+#ifdef CONFIG_SD_BOOT_QSPI
+#define CONFIG_SYS_FSL_PBL_RCW	\
+	board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
+#else
+#define CONFIG_SYS_FSL_PBL_RCW	\
+	board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
+#endif
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -139,6 +145,9 @@
 
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_SYS_TEXT_BASE		0x40010000
+#endif
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SYS_NO_FLASH
 #endif
 
@@ -165,7 +174,7 @@
 /*
  * IFC Definitions
  */
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_FSL_IFC
 #define CONFIG_SYS_FLASH_BASE		0x60000000
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
@@ -257,13 +266,13 @@
  * Serial Port
  */
 #ifdef CONFIG_LPUART
-#define CONFIG_FSL_LPUART
 #define CONFIG_LPUART_32B_REG
 #else
 #define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
+#endif
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #endif
 
@@ -275,10 +284,11 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 
 /* EEPROM */
-#ifndef CONFIG_SD_BOOT
 #define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM		1
@@ -286,7 +296,6 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
-#endif
 
 /*
  * MMC
@@ -300,20 +309,20 @@
 #define CONFIG_DOS_PARTITION
 
 /* SPI */
-#ifdef CONFIG_QSPI_BOOT
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 /* QSPI */
-#define CONFIG_FSL_QSPI
 #define QSPI0_AMBA_BASE			0x40000000
 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
 #define FSL_QSPI_FLASH_NUM		2
-#define CONFIG_SPI_FLASH_STMICRO
+
+/* DSPI */
+#endif
 
 /* DM SPI */
 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 #define CONFIG_CMD_SF
 #define CONFIG_DM_SPI_FLASH
 #endif
-#endif
 
 /*
  * Video
@@ -327,6 +336,7 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 #define CONFIG_FSL_DCU_SII9022A
 #define CONFIG_SYS_I2C_DVI_BUS_NUM	1
@@ -406,28 +416,34 @@
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
 
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#undef CONFIG_CMD_IMLS
+#endif
+
 #define CONFIG_ARMV7_NONSEC
 #define CONFIG_ARMV7_VIRT
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
-#define CONFIG_LS102XA_NS_ACCESS
+#define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
 #define CONFIG_TIMER_CLK_FREQ		12500000
 
 #define CONFIG_HWCONFIG
-#define HWCONFIG_BUFFER_SIZE		128
+#define HWCONFIG_BUFFER_SIZE		256
+
+#define CONFIG_FSL_DEVICE_DISABLE
 
 #define CONFIG_BOOTDELAY		3
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
 	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
-	"initrd_high=0xcfffffff\0"      \
-	"fdt_high=0xcfffffff\0"
+	"initrd_high=0xffffffff\0"      \
+	"fdt_high=0xffffffff\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-	"initrd_high=0xcfffffff\0"      \
-	"fdt_high=0xcfffffff\0"
+	"initrd_high=0xffffffff\0"      \
+	"fdt_high=0xffffffff\0"
 #endif
 
 /*
@@ -470,7 +486,7 @@
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 #endif
 
-#define CONFIG_SYS_QE_FW_ADDR     0x67f40000
+#define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 
 /*
  * Environment
@@ -494,19 +510,17 @@
 #define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
 #endif
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 #define CONFIG_CMD_BOOTZ
 
 #define CONFIG_MISC_INIT_R
 
 /* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
 #define CONFIG_CMD_HASH
 #define CONFIG_SHA_HW_ACCEL
+#endif
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
 #include <asm/fsl_secure_boot.h>
-#endif
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
 
 #endif