X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1021atwr.h;h=25e3f92cf5105d3e50f57748443fe904923cc6e4;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=da073290795b710de2becd4f8947f3e6eca26b77;hpb=c14d4b0051df5f569fa33d9937af1db267ed6d34;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index da07329..25e3f92 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -16,11 +16,7 @@
 #define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DEEP_SLEEP
-#ifdef CONFIG_DEEP_SLEEP
-#define CONFIG_SILENT_CONSOLE
-#endif
 
 /*
  * Size of malloc() pool
@@ -109,18 +105,13 @@
 #endif
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xe8
 
 #ifdef CONFIG_SECURE_BOOT
-#define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
 /*
  * HDR would be appended at end of image and copied to DDR along
  * with U-Boot image.
  */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		(0x400 + \
-		(CONFIG_U_BOOT_HDR_SIZE / 512)
-#else
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x400
+#define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
 #endif /* ifdef CONFIG_SECURE_BOOT */
 
 #define CONFIG_SPL_TEXT_BASE		0x10000000
@@ -302,11 +293,7 @@
 /*
  * MMC
  */
-#define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
-#define CONFIG_GENERIC_MMC
-
-#define CONFIG_DOS_PARTITION
 
 /* SPI */
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
@@ -329,13 +316,9 @@
 #define CONFIG_FSL_DCU_FB
 
 #ifdef CONFIG_FSL_DCU_FB
-#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 #define CONFIG_FSL_DCU_SII9022A
 #define CONFIG_SYS_I2C_DVI_BUS_NUM	1
@@ -381,29 +364,10 @@
 #endif
 
 /* PCIe */
-#define CONFIG_PCI		/* Enable PCI/PCIE */
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 #define CONFIG_PCIE2		/* PCIE controller 2 */
-#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
-#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
-
-#define CONFIG_SYS_PCI_64BIT
-
-#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
-#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
-#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
-#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
-
-#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
-#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
-
-#define CONFIG_SYS_PCIE_MEM_BUS		0x08000000
-#define CONFIG_SYS_PCIE_MEM_PHYS_OFF	0x04000000
-#define CONFIG_SYS_PCIE_MEM_SIZE	0x08000000	/* 128M */
 
 #ifdef CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI
 #endif