X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1021atwr.h;h=1aa29e541ec5bb73a8db02c97ca805e34a23be11;hb=c45568cc4e51b7bbe2f3ce28d8f2566048aeebf3;hp=c099629607f9b407fb51ffaf1ad995871f923301;hpb=a97a071d10d2b2d49b86f92481f766ed30f6a5ed;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index c099629..1aa29e5 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -1,23 +1,15 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2019 NXP
+ * Copyright 2019, 2021 NXP
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_ARMV7_SECURE_BASE	OCRAM_BASE_S_ADDR
-
-#define CONFIG_SYS_FSL_CLK
-
-#define CONFIG_DEEP_SLEEP
-
 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
 
-#define CONFIG_SYS_CLK_FREQ		100000000
-
 #define DDR_SDRAM_CFG			0x470c0008
 #define DDR_CS0_BNDS			0x008000bf
 #define DDR_CS0_CONFIG			0x80014302
@@ -54,16 +46,6 @@
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
 #endif /* ifdef CONFIG_NXP_ESBC */
 
-#define CONFIG_SPL_MAX_SIZE		0x1a000
-#define CONFIG_SPL_STACK		0x1001d000
-#define CONFIG_SPL_PAD_TO		0x1c000
-
-#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
-		CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-#define CONFIG_SPL_BSS_START_ADDR	0x80100000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-
 #ifdef CONFIG_U_BOOT_HDR_SIZE
 /*
  * HDR would be appended at end of image and copied to DDR along
@@ -83,13 +65,10 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_CHIP_SELECTS_PER_CTRL	4
-
 /*
  * IFC Definitions
  */
 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_FSL_IFC
 #define CONFIG_SYS_FLASH_BASE		0x60000000
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
 
@@ -119,7 +98,6 @@
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
@@ -127,7 +105,6 @@
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE_PHYS }
 
-#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 #endif
 
@@ -176,9 +153,7 @@
 /*
  * Serial Port
  */
-#ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
-#else
+#ifndef CONFIG_LPUART
 #define CONFIG_SYS_NS16550_SERIAL
 #ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -191,52 +166,13 @@
  */
 
 /* GPIO */
-#ifdef CONFIG_DM_GPIO
-#ifndef CONFIG_MPC8XXX_GPIO
-#define CONFIG_MPC8XXX_GPIO
-#endif
-#endif
 
 /* EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM		1
 
-/*
- * MMC
- */
-
-/*
- * Video
- */
-#ifdef CONFIG_VIDEO_FSL_DCU_FB
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-
-#define CONFIG_FSL_DCU_SII9022A
-#define CONFIG_SYS_I2C_DVI_BUS_NUM	1
-#define CONFIG_SYS_I2C_DVI_ADDR		0x39
-#endif
-
-/*
- * eTSEC
- */
-
-#ifdef CONFIG_TSEC_ENET
-#define CONFIG_ETHPRIME			"ethernet@2d10000"
-#endif
-
-/* PCIe */
-#define CONFIG_PCIE1		/* PCIE controller 1 */
-#define CONFIG_PCIE2		/* PCIE controller 2 */
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
-#define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
-#define COUNTER_FREQUENCY		12500000
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		256
@@ -254,7 +190,6 @@
 	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200 "	\
 		"cma=64M@0x0-0xb0000000\0" \
 	"initrd_high=0xffffffff\0"      \
-	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x65000000\0"	\
 	"scriptaddr=0x80000000\0"	\
 	"scripthdraddr=0x80080000\0"	\
@@ -311,7 +246,6 @@
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200 "	\
 		"cma=64M@0x0-0xb0000000\0" \
 	"initrd_high=0xffffffff\0"      \
-	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x61000000\0"	\
 	"kernelheader_addr=0x60800000\0"	\
 	"scriptaddr=0x80000000\0"	\
@@ -378,18 +312,6 @@
 		"bootm $load_addr#$board\0"
 #endif
 
-#undef CONFIG_BOOTCOMMAND
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
-			   "env exists secureboot && esbc_halt"
-#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "	\
-			   "env exists secureboot && esbc_halt;"
-#else
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;"	\
-			   "env exists secureboot && esbc_halt;"
-#endif
-
 /*
  * Miscellaneous configurable options
  */
@@ -397,22 +319,10 @@
 
 #define CONFIG_LS102XA_STREAM_ID
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
-#endif
-
 /*
  * Environment
  */
 
 #include <asm/fsl_secure_boot.h>
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
 
 #endif