X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1021aqds.h;h=7c651e4efd8794b3a1c5fd8c3b6628a2007e52c6;hb=6500ec7a5a2a2a59128dba6f49d9905fc1258811;hp=97b81274b0520acded483cfcf8a2cb299f338a76;hpb=3fea95369850987de15a2a0ac009d05e13b90246;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 97b8127..7c651e4 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -7,8 +7,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_LS102XA
-
 #define CONFIG_ARMV7_PSCI_1_0
 
 #define CONFIG_ARMV7_SECURE_BASE	OCRAM_BASE_S_ADDR
@@ -71,7 +69,7 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_QSPI_BOOT
-#define CONFIG_SYS_TEXT_BASE		0x40010000
+#define CONFIG_SYS_TEXT_BASE		0x40100000
 #endif
 
 #ifdef CONFIG_NAND_BOOT
@@ -127,6 +125,7 @@ unsigned long get_board_ddr_clk(void);
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 	!defined(CONFIG_QSPI_BOOT)
 #define CONFIG_U_QE
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #endif
 
 /*
@@ -221,7 +220,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 #endif
@@ -404,7 +402,6 @@ unsigned long get_board_ddr_clk(void);
 /*#define CONFIG_HAS_FSL_DR_USB*/
 
 #ifdef CONFIG_HAS_FSL_DR_USB
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
@@ -415,14 +412,12 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
 #endif
 
 /*
  * Video
  */
 #ifdef CONFIG_VIDEO_FSL_DCU_FB
-#define CONFIG_CMD_BMP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 
@@ -461,8 +456,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_ETHPRIME			"eTSEC1"
 
-#define CONFIG_PHY_GIGE
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_REALTEK
 
 #define CONFIG_HAS_ETH0
@@ -484,7 +477,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI
 #endif
 
 #define CONFIG_CMDLINE_TAG
@@ -501,7 +493,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_DEVICE_DISABLE
 
 
-#define CONFIG_SYS_QE_FW_ADDR     0x600c0000
+#define CONFIG_SYS_QE_FW_ADDR     0x60940000
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
@@ -552,34 +544,24 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_OVERWRITE
 
 #if defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET		0x100000
-#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET		0x300000
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_SIZE			0x2000
 #elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE			0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET		0x100000        /* 1MB */
+#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE		0x10000
 #elif defined(CONFIG_NAND_BOOT)
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE			0x2000
 #define CONFIG_ENV_OFFSET		(10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SIZE			0x2000
 #define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
 #endif
 
 #define CONFIG_MISC_INIT_R
 
-/* Hash command with SHA acceleration supported in hardware */
-#ifdef CONFIG_FSL_CAAM
-#define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
-#endif
-
 #include <asm/fsl_secure_boot.h>
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */