X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1021aqds.h;h=3cbbd73920290dbe28e66cd24afcc34ce732806d;hb=f89d6133eef2e068f9c33853b6584d7fcbfa9d2e;hp=0b4a6a47f433fa0de7cdfdc87cff8fb23b6decdf;hpb=83d290c56fab2d38cd1ab4c4cc7099559c1d5046;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 0b4a6a4..3cbbd73 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -51,7 +51,6 @@ unsigned long get_board_ddr_clk(void);
 	board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg
 #endif
 
-#define CONFIG_SPL_TEXT_BASE		0x10000000
 #define CONFIG_SPL_MAX_SIZE		0x1a000
 #define CONFIG_SPL_STACK		0x1001d000
 #define CONFIG_SPL_PAD_TO		0x1c000
@@ -67,7 +66,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SYS_FSL_PBL_RCW	board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
 
-#define CONFIG_SPL_TEXT_BASE		0x10000000
 #define CONFIG_SPL_MAX_SIZE		0x1a000
 #define CONFIG_SPL_STACK		0x1001d000
 #define CONFIG_SPL_PAD_TO		0x1c000
@@ -85,13 +83,10 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_MONITOR_LEN		0x80000
 #endif
 
-#define CONFIG_NR_DRAM_BANKS		1
-
 #define CONFIG_DDR_SPD
 #define SPD_EEPROM_ADDRESS		0x51
 #define CONFIG_SYS_SPD_BUS_NUM		0
 
-#define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
 #ifndef CONFIG_SYS_FSL_DDR4
 #define CONFIG_SYS_DDR_RAW_TIMING
 #endif
@@ -109,7 +104,6 @@ unsigned long get_board_ddr_clk(void);
 
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 	!defined(CONFIG_QSPI_BOOT)
-#define CONFIG_U_QE
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #endif
 
@@ -148,9 +142,6 @@ unsigned long get_board_ddr_clk(void);
 					FTIM2_NOR_TWP(0x1c))
 #define CONFIG_SYS_NOR_FTIM3		0
 
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS	45
 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
@@ -351,6 +342,15 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM		0
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+
 /*
  * I2C bus multiplexer
  */
@@ -396,7 +396,6 @@ unsigned long get_board_ddr_clk(void);
  */
 
 #ifdef CONFIG_TSEC_ENET
-#define CONFIG_MII
 #define CONFIG_MII_DEFAULT_TSEC		3
 #define CONFIG_TSEC1			1
 #define CONFIG_TSEC1_NAME		"eTSEC1"
@@ -515,8 +514,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
 #endif
 
-#define CONFIG_MISC_INIT_R
-
 #include <asm/fsl_secure_boot.h>
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */