X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012ardb.h;h=ab139b00dd7083f58f909307d4fd625adde8df64;hb=1a3fc354b50b2a86361964b6d695ce26058248f5;hp=6046ab789525d8bb975aa7d7fea45fca9130d0f3;hpb=2313d48445e59f063ec9a3b4940fe8252737db76;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index 6046ab7..ab139b0 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -9,62 +9,45 @@ #include "ls1012a_common.h" - +/* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_NR_DRAM_BANKS 2 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 - -#define CONFIG_SYS_MMDC_CORE_CONTROL_1 0x05180000 -#define CONFIG_SYS_MMDC_CORE_CONTROL_2 0x85180000 - #define CONFIG_CMD_MEMINFO #define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff -/* -* USB -*/ -#define CONFIG_HAS_FSL_XHCI_USB - -#ifdef CONFIG_HAS_FSL_XHCI_USB -#define CONFIG_USB_XHCI_FSL -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE -#endif /* * I2C IO expander */ -#define I2C_MUX_IO1_ADDR 0x24 -#define __SW_BOOT_MASK 0xFC -#define __SW_BOOT_EMU 0x10 -#define __SW_BOOT_BANK1 0x00 -#define __SW_BOOT_BANK2 0x01 -#define __SW_REV_MASK 0x07 -#define __SW_REV_A 0xF8 -#define __SW_REV_B 0xF0 +#define I2C_MUX_IO_ADDR 0x24 +#define I2C_MUX_IO_0 0 +#define I2C_MUX_IO_1 1 +#define SW_BOOT_MASK 0x03 +#define SW_BOOT_EMU 0x02 +#define SW_BOOT_BANK1 0x00 +#define SW_BOOT_BANK2 0x01 +#define SW_REV_MASK 0xF8 +#define SW_REV_A 0xF8 +#define SW_REV_B 0xF0 +#define SW_REV_C 0xE8 +#define SW_REV_C1 0xE0 +#define SW_REV_C2 0xD8 +#define SW_REV_D 0xD0 +#define SW_REV_E 0xC8 /* MMC */ -#define CONFIG_MMC #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 -#define CONFIG_GENERIC_MMC -#define CONFIG_DOS_PARTITION #endif /* SATA */ -#define CONFIG_LIBATA -#define CONFIG_SCSI -#define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_CMD_SCSI -#define CONFIG_DOS_PARTITION -#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_SATA AHCI_BASE_ADDR @@ -72,34 +55,60 @@ #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) -#define CONFIG_PCI /* Enable PCI/PCIE */ -#define CONFIG_PCIE1 /* PCIE controller 1 */ -#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ -#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie" -#define CONFIG_SYS_PCI_64BIT - -#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 -#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ -#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 -#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ - -#define CONFIG_SYS_PCIE_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 -#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ - -#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 -#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 -#define CONFIG_SYS_PCIE_MEM_SIZE 0x80000000 /* 128M */ +#define CONFIG_PCIE1 /* PCIE controller 1 */ -#define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI #define CONFIG_CMD_MEMINFO #define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=no\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "scriptaddr=0x80000000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "load_addr=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "console=ttyS0,115200\0" \ + BOOTENV \ + "boot_scripts=ls1012ardb_boot.scr\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "installer=load mmc 0:2 $load_addr " \ + "/flex_installer_arm64.itb; " \ + "bootm $load_addr#$board\0" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ + "sf probe && sf read $load_addr " \ + "$kernel_addr $kernel_size && bootm $load_addr#$board\0" + +#undef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" + +#include + #endif /* __LS1012ARDB_H__ */