X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012ardb.h;h=4f77acdaedec021f2fbd397e3e4c9480aff2eaca;hb=a29491ade0adf3dbb9dc51be8b45530edde1f1df;hp=3cd7baf21dad0ebf812348a13cfd4eba1fec053a;hpb=f0fcab6f8e11cee6d6b81a08fbfc641f6fcce0ec;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index 3cd7baf..4f77acd 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * Copyright 2020-2021 NXP
  * Copyright 2016 Freescale Semiconductor, Inc.
  */
 
@@ -9,16 +10,8 @@
 #include "ls1012a_common.h"
 
 /* DDR */
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
-
-/* ENV */
-#define CONFIG_SYS_FSL_QSPI_BASE	0x40000000
 /*
  * I2C IO expander
  */
@@ -43,37 +36,22 @@
 #define __PHY_ETH2_MASK		0xFB
 #define __PHY_ETH1_MASK		0xFD
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-
-#define CONFIG_PCIE1		/* PCIE controller 1 */
-
-#define CONFIG_PCI_SCAN_SHOW
-
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
-
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
-	"fdt_high=0xffffffffffffffff\0"		\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"fdt_addr=0x00f00000\0"			\
 	"kernel_addr=0x01000000\0"		\
-	"kernelheader_addr=0x800000\0"		\
+	"kernelheader_addr=0x600000\0"		\
 	"scriptaddr=0x80000000\0"		\
 	"scripthdraddr=0x80080000\0"		\
 	"fdtheader_addr_r=0x80100000\0"		\
 	"kernelheader_addr_r=0x80200000\0"	\
-	"kernel_addr_r=0x81000000\0"		\
+	"kernel_addr_r=0x96000000\0"		\
 	"fdt_addr_r=0x90000000\0"		\
 	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"kernelheader_size=0x40000\0"		\
+	"bootm_size=0x10000000\0"		\
 	"console=ttyS0,115200\0"		\
 	BOOTENV					\
 	"boot_scripts=ls1012ardb_boot.scr\0"	\
@@ -88,13 +66,6 @@
 		      "run scan_dev_for_boot; "	\
 		  "fi; "			\
 	      "done\0"				\
-	"scan_dev_for_boot="				  \
-		"echo Scanning ${devtype} "		  \
-				"${devnum}:${distro_bootpart}...; "  \
-		"for prefix in ${boot_prefixes}; do "	  \
-			"run scan_dev_for_scripts; "	  \
-		"done;"					  \
-		"\0"					  \
 	"boot_a_script="				  \
 		"load ${devtype} ${devnum}:${distro_bootpart} "  \
 			"${scriptaddr} ${prefix}${script}; "    \
@@ -114,14 +85,10 @@
 		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 		"bootm $load_addr#$board\0"
 
-#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #undef QSPI_NOR_BOOTCOMMAND
-#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
 			     "env exists secureboot && esbc_halt;"
-#else
-#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
-			   "env exists secureboot && esbc_halt;"
 #endif
 
 #include <asm/fsl_secure_boot.h>