X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012aqds.h;h=d57f28e4967ede2ffabd95d6acae029634e1a58c;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=bf4262a01d55da9623044f39de4688a780d5c317;hpb=373b9003410b44a1133060c2e63483b278fb476b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index bf4262a..d57f28e 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -1,7 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
+ * Copyright 2021 NXP
  */
 
 #ifndef __LS1012AQDS_H__
@@ -11,13 +11,7 @@
 
 /* DDR */
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
-#define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
 /*
  * QIXIS Definitions
@@ -56,17 +50,11 @@
 * RTC configuration
 */
 #define RTC
-#define CONFIG_RTC_PCF8563 1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM    0
-#define CONFIG_SYS_I2C_EEPROM_ADDR   0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN     1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
 
 /* Voltage monitor on channel 2*/
@@ -77,9 +65,7 @@
 
 /* DSPI */
 #define CONFIG_FSL_DSPI1
-#define CONFIG_DEFAULT_SPI_BUS 1
 
-#define CONFIG_CMD_SPI
 #define MMAP_DSPI          DSPI1_BASE_ADDR
 
 #define CONFIG_SYS_DSPI_CTAR0   1
@@ -88,50 +74,71 @@
 				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
 				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
 				DSPI_CTAR_DT(0))
-#define CONFIG_SPI_FLASH_SST /* cs1 */
 
 #define CONFIG_SYS_DSPI_CTAR2	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
 				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
 				DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \
 				DSPI_CTAR_DT(0))
-#define CONFIG_SPI_FLASH_STMICRO /* cs2 */
 
 #define CONFIG_SYS_DSPI_CTAR3	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
 				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
 				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
 				DSPI_CTAR_DT(0))
-#define CONFIG_SPI_FLASH_EON /* cs3 */
-
-#define CONFIG_SF_DEFAULT_SPEED      10000000
-#define CONFIG_SF_DEFAULT_MODE       SPI_MODE_0
-#define CONFIG_SF_DEFAULT_BUS        1
-#define CONFIG_SF_DEFAULT_CS         0
-
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 
 #define CONFIG_PCI_SCAN_SHOW
 
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
-
-#define CONFIG_MISC_INIT_R
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"verify=no\0"				\
+	"fdt_addr=0x00f00000\0"			\
+	"kernel_addr=0x01000000\0"		\
+	"kernelheader_addr=0x600000\0"		\
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x96000000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"console=ttyS0,115200\0"		\
+	BOOTENV					\
+	"boot_scripts=ls1012aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1012aqds_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+	     "part list ${devtype} ${devnum} devplist; "	\
+	     "env exists devplist || setenv devplist 1; "	\
+	     "for distro_bootpart in ${devplist}; do "		\
+		  "if fstype ${devtype} "			\
+		      "${devnum}:${distro_bootpart} "		\
+		      "bootfstype; then "			\
+		      "run scan_dev_for_boot; "	\
+		  "fi; "			\
+	      "done\0"				\
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr}; " \
+			"env exists secureboot "	\
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
+		"sf probe 0:0 && sf read $load_addr "	\
+		"$kernel_addr $kernel_size; env exists secureboot "	\
+		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"
+
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
+			     "env exists secureboot && esbc_halt;"
+#endif
 
+#include <asm/fsl_secure_boot.h>
 #endif /* __LS1012AQDS_H__ */