X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012aqds.h;h=cbcb3f72a5622caca40661a827dc9c7162f4df17;hb=f76750d1113380462413bad94d7a400af1aa4909;hp=df2a613eaf390cf39da8c402e037f0d5d3744842;hpb=18261b8552232e342709e69eadec33090a7f04e4;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index df2a613..cbcb3f7 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2021 NXP */ #ifndef __LS1012AQDS_H__ @@ -53,13 +54,8 @@ #define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ /* EEPROM */ -#define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* Voltage monitor on channel 2*/ @@ -79,28 +75,71 @@ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_SST /* cs1 */ #define CONFIG_SYS_DSPI_CTAR2 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_STMICRO /* cs2 */ #define CONFIG_SYS_DSPI_CTAR3 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_EON /* cs3 */ - -/* MMC */ -#ifdef CONFIG_MMC -#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 -#endif #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCI_SCAN_SHOW +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=no\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "kernelheader_addr=0x600000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "kernel_addr_r=0x96000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "load_addr=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "kernelheader_size=0x40000\0" \ + "console=ttyS0,115200\0" \ + BOOTENV \ + "boot_scripts=ls1012aqds_boot.scr\0" \ + "boot_script_hdr=hdr_ls1012aqds_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ + "env exists secureboot " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ + "sf probe 0:0 && sf read $load_addr " \ + "$kernel_addr $kernel_size; env exists secureboot " \ + "&& sf read $kernelheader_addr_r $kernelheader_addr " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ + "bootm $load_addr#$board\0" + +#ifdef CONFIG_TFABOOT +#undef QSPI_NOR_BOOTCOMMAND +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ + "env exists secureboot && esbc_halt;" +#endif + #include #endif /* __LS1012AQDS_H__ */