X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012aqds.h;h=9ad3a1201183fd4e988a3e59965de1ac89d63ee5;hb=aec118ebe63f7f0ab60916f9906fb3cb680abf7a;hp=a5900f226c9e8a30e39a111e1f72e0a0b891c34b;hpb=6674edaabfd271471608146806f5b6540bc76a1b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index a5900f2..9ad3a12 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -10,17 +10,13 @@
 #include "ls1012a_common.h"
 
 /* DDR */
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
 
 /*
  * QIXIS Definitions
  */
-#define CONFIG_FSL_QIXIS
 
 #ifdef CONFIG_FSL_QIXIS
-#define CONFIG_QIXIS_I2C_ACCESS
 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
 #define QIXIS_LBMAP_BRDCFG_REG		0x04
 #define QIXIS_LBMAP_SWITCH		6
@@ -53,10 +49,6 @@
 #define RTC
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM    0
-
 
 /* Voltage monitor on channel 2*/
 #define I2C_VOL_MONITOR_ADDR           0x40
@@ -64,39 +56,9 @@
 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 
-/* DSPI */
-#define CONFIG_FSL_DSPI1
-
-#define MMAP_DSPI          DSPI1_BASE_ADDR
-
-#define CONFIG_SYS_DSPI_CTAR0   1
-
-#define CONFIG_SYS_DSPI_CTAR1	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
-				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
-				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
-				DSPI_CTAR_DT(0))
-#define CONFIG_SPI_FLASH_SST /* cs1 */
-
-#define CONFIG_SYS_DSPI_CTAR2	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
-				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
-				DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \
-				DSPI_CTAR_DT(0))
-#define CONFIG_SPI_FLASH_STMICRO /* cs2 */
-
-#define CONFIG_SYS_DSPI_CTAR3	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
-				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
-				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
-				DSPI_CTAR_DT(0))
-#define CONFIG_SPI_FLASH_EON /* cs3 */
-
-#define CONFIG_PCIE1		/* PCIE controller 1 */
-
-#define CONFIG_PCI_SCAN_SHOW
-
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
-	"fdt_addr=0x00f00000\0"			\
 	"kernel_addr=0x01000000\0"		\
 	"kernelheader_addr=0x600000\0"		\
 	"scriptaddr=0x80000000\0"		\
@@ -138,14 +100,10 @@
 		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 		"bootm $load_addr#$board\0"
 
-#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #undef QSPI_NOR_BOOTCOMMAND
 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
 			     "env exists secureboot && esbc_halt;"
-#else
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
-			   "env exists secureboot && esbc_halt;"
 #endif
 
 #include <asm/fsl_secure_boot.h>