X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012aqds.h;h=48fe8288aa187df8dbfd0f6383e2996a469c4d03;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=9498a03f405b0af745e2953c01cc8d26d4bf7dec;hpb=08649c3d50b1ca014a9e0bf87c724f99f88a20ce;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index 9498a03..48fe828 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
  */
 
 #ifndef __LS1012AQDS_H__
@@ -9,17 +10,13 @@
 #include "ls1012a_common.h"
 
 /* DDR */
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
 
 /*
  * QIXIS Definitions
  */
-#define CONFIG_FSL_QIXIS
 
 #ifdef CONFIG_FSL_QIXIS
-#define CONFIG_QIXIS_I2C_ACCESS
 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
 #define QIXIS_LBMAP_BRDCFG_REG		0x04
 #define QIXIS_LBMAP_SWITCH		6
@@ -50,17 +47,11 @@
 * RTC configuration
 */
 #define RTC
-#define CONFIG_RTC_PCF8563 1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM    0
-#define CONFIG_SYS_I2C_EEPROM_ADDR   0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN     1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
 
 /* Voltage monitor on channel 2*/
@@ -69,39 +60,55 @@
 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 
-/* DSPI */
-#define CONFIG_FSL_DSPI1
-
-#define MMAP_DSPI          DSPI1_BASE_ADDR
-
-#define CONFIG_SYS_DSPI_CTAR0   1
-
-#define CONFIG_SYS_DSPI_CTAR1	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
-				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
-				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
-				DSPI_CTAR_DT(0))
-#define CONFIG_SPI_FLASH_SST /* cs1 */
-
-#define CONFIG_SYS_DSPI_CTAR2	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
-				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
-				DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \
-				DSPI_CTAR_DT(0))
-#define CONFIG_SPI_FLASH_STMICRO /* cs2 */
-
-#define CONFIG_SYS_DSPI_CTAR3	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
-				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
-				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
-				DSPI_CTAR_DT(0))
-#define CONFIG_SPI_FLASH_EON /* cs3 */
-
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"verify=no\0"				\
+	"kernel_addr=0x01000000\0"		\
+	"kernelheader_addr=0x600000\0"		\
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x96000000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"console=ttyS0,115200\0"		\
+	BOOTENV					\
+	"boot_scripts=ls1012aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1012aqds_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+	     "part list ${devtype} ${devnum} devplist; "	\
+	     "env exists devplist || setenv devplist 1; "	\
+	     "for distro_bootpart in ${devplist}; do "		\
+		  "if fstype ${devtype} "			\
+		      "${devnum}:${distro_bootpart} "		\
+		      "bootfstype; then "			\
+		      "run scan_dev_for_boot; "	\
+		  "fi; "			\
+	      "done\0"				\
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr}; " \
+			"env exists secureboot "	\
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
+		"sf probe 0:0 && sf read $load_addr "	\
+		"$kernel_addr $kernel_size; env exists secureboot "	\
+		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"
+
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
+			     "env exists secureboot && esbc_halt;"
 #endif
 
-#define CONFIG_PCIE1		/* PCIE controller 1 */
-
-#define CONFIG_PCI_SCAN_SHOW
-
 #include <asm/fsl_secure_boot.h>
 #endif /* __LS1012AQDS_H__ */