X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012afrwy.h;h=f8b386125cce00690ec100c79526631d9dc115c9;hb=92832045c54586e9dffa082ff8cd8c2ef6040757;hp=6143e9731e508901329cd6a9278d906b0eabc179;hpb=2f2031e647564be8121c05507fbec8e6c5bc0e63;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index 6143e97..f8b3861 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2018 NXP
+ * Copyright 2018, 2021 NXP
  */
 
 #ifndef __LS1012AFRWY_H__
@@ -21,10 +21,6 @@
 #define SYS_SDRAM_SIZE_512		0x20000000
 #define SYS_SDRAM_SIZE_1024		0x40000000
 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
 /* ENV */
 #define CONFIG_SYS_FSL_QSPI_BASE	0x40000000
@@ -33,15 +29,8 @@
 #undef BOOT_TARGET_DEVICES
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
-	func(USB, usb, 0)
-#endif
-
-#undef FSL_QSPI_FLASH_SIZE
-#define FSL_QSPI_FLASH_SIZE            SZ_16M
-
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+	func(USB, usb, 0) \
+	func(DHCP, dhcp, na)
 #endif
 
 #define CONFIG_PCIE1		/* PCIE controller 1 */
@@ -51,7 +40,6 @@
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
-	"fdt_high=0xffffffffffffffff\0"		\
 	"initrd_high=0xffffffffffffffff\0"	\
 	"fdt_addr=0x00f00000\0"			\
 	"kernel_addr=0x01000000\0"		\
@@ -71,6 +59,7 @@
 	"load_addr=0x92000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"kernelheader_size=0x40000\0"		\
+	"bootm_size=0x10000000\0"		\
 	"console=ttyS0,115200\0"		\
 	"BOARD=ls1012afrwy\0"			\
 	BOOTENV					\
@@ -86,13 +75,6 @@
 		      "run scan_dev_for_boot; "	\
 		  "fi; "			\
 	      "done\0"				\
-	"scan_dev_for_boot="				  \
-		"echo Scanning ${devtype} "		  \
-				"${devnum}:${distro_bootpart}...; "  \
-		"for prefix in ${boot_prefixes}; do "	  \
-			"run scan_dev_for_scripts; "	  \
-		"done;"					  \
-		"\0"					  \
 	"boot_a_script="				  \
 		"load ${devtype} ${devnum}:${distro_bootpart} "  \
 			"${scriptaddr} ${prefix}${script}; "    \
@@ -102,16 +84,7 @@
 			"env exists secureboot "	\
 			"&& esbc_validate ${scripthdraddr};"    \
 		"source ${scriptaddr}\0"	  \
-	"installer=load mmc 0:2 $load_addr "	\
-		   "/flex_installer_arm64.itb; "	\
-		   "bootm $load_addr#$BOARD\0"	\
-	"qspi_bootcmd=pfe stop; echo Trying load from qspi..;"	\
-		"sf probe && sf read $load_addr "	\
-		"$kernel_addr $kernel_size; env exists secureboot "	\
-		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
-		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
-		"bootm $load_addr#$BOARD\0"	\
-	"sd_bootcmd=pfe stop; echo Trying load from sd card..;"		\
+	"sd_bootcmd=echo Trying load from sd card..;"		\
 		"mmcinfo; mmc read $load_addr "			\
 		"$kernel_addr_sd $kernel_size_sd ;"		\
 		"env exists secureboot && mmc read $kernelheader_addr_r "\
@@ -122,16 +95,12 @@
 #undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #undef QSPI_NOR_BOOTCOMMAND
-#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\
 			     "env exists secureboot && esbc_halt;"
 #else
-#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\
 			   "env exists secureboot && esbc_halt;"
 #endif
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
 #include <asm/fsl_secure_boot.h>