X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012afrdm.h;h=674bcbeb75844f24a19b9d923b515a0479681aa6;hb=e9dcd5b40236b82672117464564d38511f1f7a0b;hp=8a3ebf06f2d449f112ccaebdcb4b479acb6265a7;hpb=a3c9805f791eb0f7700fe7a1b8f5bbb1027ab49e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
index 8a3ebf0..674bcbe 100644
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
  */
 
 #ifndef __LS1012ARDB_H__
@@ -9,26 +10,16 @@
 #include "ls1012a_common.h"
 
 /* DDR */
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
-#ifndef CONFIG_SPL_BUILD
 #undef BOOT_TARGET_DEVICES
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0)
-#endif
 
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
 	"fdt_high=0xffffffffffffffff\0"		\
-	"initrd_high=0xffffffffffffffff\0"	\
-	"fdt_addr=0x00f00000\0"			\
 	"kernel_addr=0x01000000\0"		\
 	"scriptaddr=0x80000000\0"		\
 	"fdtheader_addr_r=0x80100000\0"		\
@@ -37,6 +28,7 @@
 	"fdt_addr_r=0x90000000\0"		\
 	"load_addr=0x96000000\0"		\
 	"kernel_size=0x2800000\0"		\
+	"bootm_size=0x10000000\0"		\
 	"console=ttyS0,115200\0"		\
 	BOOTENV					\
 	"boot_scripts=ls1012afrdm_boot.scr\0"	\
@@ -50,30 +42,16 @@
 		      "run scan_dev_for_boot; "	\
 		  "fi; "			\
 	      "done\0"				\
-	"scan_dev_for_boot="				  \
-		"echo Scanning ${devtype} "		  \
-				"${devnum}:${distro_bootpart}...; "  \
-		"for prefix in ${boot_prefixes}; do "	  \
-			"run scan_dev_for_scripts; "	  \
-		"done;"					  \
-		"\0"					  \
 	"installer=load usb 0:2 $load_addr "	\
 		   "/flex_installer_arm64.itb; "	\
 		   "bootm $load_addr#$board\0"	\
-	"qspi_bootcmd=pfe stop; echo Trying load from qspi..;"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
 		"sf probe && sf read $load_addr "	\
 		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"
 
-#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #undef QSPI_NOR_BOOTCOMMAND
-#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
-#else
-#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
 #endif
 
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
-
 #endif /* __LS1012ARDB_H__ */