X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012a_common.h;h=e9baa2a8b66c663707fea25aeb267259353d6e16;hb=6d7dacf726ca043a3f5487549bbfa506c990c813;hp=46b3566adf8882bc6a69ed77a3af38fa8d1a1cfd;hpb=e12546de54fc9be818e8d39967b07fa351d9e5ba;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 46b3566..e9baa2a 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -1,25 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __LS1012A_COMMON_H
 #define __LS1012A_COMMON_H
 
-#define CONFIG_FSL_LAYERSCAPE
 #define CONFIG_GICV2
 
 #include <asm/arch/config.h>
 #include <asm/arch/stream_id_lsch2.h>
 
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
 #define CONFIG_SYS_CLK_FREQ		125000000
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
+#else
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
@@ -37,18 +37,12 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
 
 /*SPI device */
-#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_TFABOOT)
 #define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		1000000
-#define CONFIG_ENV_SPI_MODE		0x03
 #define CONFIG_SPI_FLASH_SPANSION
 #define CONFIG_FSL_SPI_INTERFACE
 #define CONFIG_SF_DATAFLASH
 
-#define CONFIG_FSL_QSPI
 #define QSPI0_AMBA_BASE		0x40000000
 #define CONFIG_SPI_FLASH_SPANSION
 
@@ -59,10 +53,6 @@
  * Environment
  */
 #define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_ENV_SIZE			0x40000          /* 256KB */
-#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
-#define CONFIG_ENV_SECT_SIZE		0x40000
 #endif
 
 /* SATA */
@@ -76,12 +66,13 @@
 						CONFIG_SYS_SCSI_MAX_LUN)
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
+#endif
 
-#define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
@@ -95,9 +86,10 @@
 
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
-	func(SCSI, scsi, 0) \
 	func(MMC, mmc, 0) \
-	func(USB, usb, 0)
+	func(USB, usb, 0) \
+	func(SCSI, scsi, 0) \
+	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 #endif
 
@@ -113,9 +105,15 @@
 	"kernel_size=0x2800000\0"		\
 
 #undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND		"sf probe 0:0; sf read $kernel_load "\
-					"$kernel_start $kernel_size && "\
-					"bootm $kernel_load"
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND	"pfe stop; sf probe 0:0; sf read $kernel_load "\
+				"$kernel_start $kernel_size && "\
+				"bootm $kernel_load"
+#else
+#define CONFIG_BOOTCOMMAND	"pfe stop; sf probe 0:0; sf read $kernel_load "\
+				"$kernel_start $kernel_size && "\
+				"bootm $kernel_load"
+#endif
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */