X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012a_common.h;h=a5f680db2d37f699d38b7c6ea5294088308e165f;hb=4db386655a889b6466d2c3f40839ad21205c6d21;hp=6f55acc7db11f60c88c8eade19125d304767b7e9;hpb=6d0453d88915feeece6e55748a2476d8509e5fad;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 6f55acc..a5f680d 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -6,91 +6,35 @@
 #ifndef __LS1012A_COMMON_H
 #define __LS1012A_COMMON_H
 
-#define CONFIG_GICV2
-
 #include <asm/arch/config.h>
 #include <asm/arch/stream_id_lsch2.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SYS_CLK_FREQ		125000000
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
-#else
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
-#endif
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
-
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
-#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		25000000	/* 25MHz */
-
-/* CSU */
-#define CONFIG_LAYERSCAPE_NS_ACCESS
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(5 * SZ_1M)
-
-/* PFE */
-#define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x300000
+#define CFG_SYS_DDR_SDRAM_BASE	0x80000000
+#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
+#define CFG_SYS_SDRAM_BASE		CFG_SYS_DDR_SDRAM_BASE
+#define CFG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
 
 /*SPI device */
-#define CONFIG_SYS_FSL_QSPI_BASE	0x40000000
-
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
+#define CFG_SYS_FSL_QSPI_BASE	0x40000000
 
 /* I2C */
-#if !CONFIG_IS_ENABLED(DM_I2C)
-#define CONFIG_SYS_I2C
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
-#endif
 
 /* GPIO */
-#ifdef CONFIG_DM_GPIO
-#ifndef CONFIG_MPC8XXX_GPIO
-#define CONFIG_MPC8XXX_GPIO
-#endif
-#endif
-
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE     1
-#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_SYS_HZ			1000
+#define CFG_SYS_NS16550_CLK          (get_serial_clock())
 
-#define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(USB, usb, 0) \
 	func(SCSI, scsi, 0) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
-#endif
 
 /* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
+#define CFG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
 	"loadaddr=0x80100000\0"			\
 	"kernel_addr=0x100000\0"		\
@@ -100,23 +44,12 @@
 	"kernel_size=0x2800000\0"		\
 	"bootm_size=0x10000000\0"		\
 
-#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #define QSPI_NOR_BOOTCOMMAND	"sf probe 0:0; sf read $kernel_load "\
 				"$kernel_start $kernel_size && "\
 				"bootm $kernel_load"
-#else
-#define CONFIG_BOOTCOMMAND	"sf probe 0:0; sf read $kernel_load "\
-				"$kernel_start $kernel_size && "\
-				"bootm $kernel_load"
 #endif
 
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS		64	/* max command args */
-
-#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
-
 #include <asm/arch/soc.h>
 
 #endif /* __LS1012A_COMMON_H */