X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012a_common.h;h=7cbea26924526f1d8a47a7b5419d073b79f39eb5;hb=f76750d1113380462413bad94d7a400af1aa4909;hp=dd2a679b799ae04ba78daf42dac84cd7bfef54e7;hpb=54869e0811b341f95458c509fd565e3c4bab6a01;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index dd2a679..7cbea26 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -6,21 +6,17 @@
 #ifndef __LS1012A_COMMON_H
 #define __LS1012A_COMMON_H
 
-#define CONFIG_GICV2
-
 #include <asm/arch/config.h>
 #include <asm/arch/stream_id_lsch2.h>
+#include <linux/sizes.h>
 
 #define CONFIG_SYS_CLK_FREQ		125000000
 
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
 #ifdef CONFIG_TFABOOT
 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
 #else
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
 #endif
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
@@ -33,35 +29,8 @@
 /* CSU */
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
-
 /*SPI device */
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_TFABOOT)
-#define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_FSL_SPI_INTERFACE
-#define CONFIG_SF_DATAFLASH
-
-#define QSPI0_AMBA_BASE		0x40000000
-#define CONFIG_SPI_FLASH_SPANSION
-
-#define FSL_QSPI_FLASH_SIZE		SZ_64M
-#define FSL_QSPI_FLASH_NUM		2
-
-/*
- * Environment
- */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_ENV_SIZE			0x40000          /* 256KB */
-#ifdef CONFIG_TFABOOT
-#define CONFIG_ENV_OFFSET		0x500000        /* 5MB */
-#else
-#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
-#endif
-#define CONFIG_ENV_SECT_SIZE		0x40000
-#endif
+#define CONFIG_SYS_FSL_QSPI_BASE	0x40000000
 
 /* SATA */
 #define CONFIG_SCSI_AHCI_PLAT
@@ -74,16 +43,13 @@
 						CONFIG_SYS_SCSI_MAX_LUN)
 
 /* I2C */
-#define CONFIG_SYS_I2C
+
+/* GPIO */
 
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
@@ -101,19 +67,14 @@
 	"verify=no\0"				\
 	"loadaddr=0x80100000\0"			\
 	"kernel_addr=0x100000\0"		\
-	"fdt_high=0xffffffffffffffff\0"		\
 	"initrd_high=0xffffffffffffffff\0"	\
 	"kernel_start=0x1000000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
+	"bootm_size=0x10000000\0"		\
 
-#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
-#define QSPI_NOR_BOOTCOMMAND	"pfe stop; sf probe 0:0; sf read $kernel_load "\
-				"$kernel_start $kernel_size && "\
-				"bootm $kernel_load"
-#else
-#define CONFIG_BOOTCOMMAND	"pfe stop; sf probe 0:0; sf read $kernel_load "\
+#define QSPI_NOR_BOOTCOMMAND	"sf probe 0:0; sf read $kernel_load "\
 				"$kernel_start $kernel_size && "\
 				"bootm $kernel_load"
 #endif