X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012a_common.h;h=7cbea26924526f1d8a47a7b5419d073b79f39eb5;hb=f76750d1113380462413bad94d7a400af1aa4909;hp=701292c98824f21e69dca933f179b788a9750c90;hpb=55dabcc8f24598e2777f663de09ab55fbe1269da;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 701292c..7cbea26 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -6,22 +6,17 @@
 #ifndef __LS1012A_COMMON_H
 #define __LS1012A_COMMON_H
 
-#define CONFIG_GICV2
-
 #include <asm/arch/config.h>
 #include <asm/arch/stream_id_lsch2.h>
 #include <linux/sizes.h>
 
 #define CONFIG_SYS_CLK_FREQ		125000000
 
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
 #ifdef CONFIG_TFABOOT
 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
 #else
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
 #endif
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
@@ -34,13 +29,6 @@
 /* CSU */
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(5 * SZ_1M)
-
-/* PFE */
-#define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x300000
-
 /*SPI device */
 #define CONFIG_SYS_FSL_QSPI_BASE	0x40000000
 
@@ -55,27 +43,13 @@
 						CONFIG_SYS_SCSI_MAX_LUN)
 
 /* I2C */
-#if !CONFIG_IS_ENABLED(DM_I2C)
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
-#endif
 
 /* GPIO */
-#ifdef CONFIG_DM_GPIO
-#ifndef CONFIG_MPC8XXX_GPIO
-#define CONFIG_MPC8XXX_GPIO
-#endif
-#endif
 
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
@@ -99,15 +73,10 @@
 	"kernel_size=0x2800000\0"		\
 	"bootm_size=0x10000000\0"		\
 
-#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
 #define QSPI_NOR_BOOTCOMMAND	"sf probe 0:0; sf read $kernel_load "\
 				"$kernel_start $kernel_size && "\
 				"bootm $kernel_load"
-#else
-#define CONFIG_BOOTCOMMAND	"sf probe 0:0; sf read $kernel_load "\
-				"$kernel_start $kernel_size && "\
-				"bootm $kernel_load"
 #endif
 
 /* Monitor Command Prompt */