X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012a_common.h;h=6cf6a31d767f3130ab162ea0bdd167c67f2d0b72;hb=8d1fc6fb89826efb6bbbedb57862496e18737877;hp=57cae9498cbd20565a4664cb436491e814444546;hpb=4def378fab61b8e4dededb818e92cd8dc075bcff;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 57cae94..6cf6a31 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -1,29 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __LS1012A_COMMON_H
 #define __LS1012A_COMMON_H
 
-#define CONFIG_FSL_LAYERSCAPE
 #define CONFIG_GICV2
 
 #include <asm/arch/config.h>
 #include <asm/arch/stream_id_lsch2.h>
-
-#define CONFIG_SUPPORT_RAW_INITRD
-
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-#define CONFIG_SYS_TEXT_BASE		0x40100000
+#include <linux/sizes.h>
 
 #define CONFIG_SYS_CLK_FREQ		125000000
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
+#else
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
@@ -38,44 +35,33 @@
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(5 * SZ_1M)
 
-/*SPI device */
-#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
+/* PFE */
 #define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		1000000
-#define CONFIG_ENV_SPI_MODE		0x03
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_FSL_SPI_INTERFACE
-#define CONFIG_SF_DATAFLASH
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x300000
 
-#define CONFIG_FSL_QSPI
-#define QSPI0_AMBA_BASE		0x40000000
-#define CONFIG_SPI_FLASH_SPANSION
+/*SPI device */
+#define CONFIG_SYS_FSL_QSPI_BASE	0x40000000
 
-#define FSL_QSPI_FLASH_SIZE		SZ_64M
-#define FSL_QSPI_FLASH_NUM		2
+/* SATA */
+#define CONFIG_SCSI_AHCI_PLAT
 
-/*
- * Environment
- */
-#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
 
-#define CONFIG_ENV_SIZE			0x40000          /* 256KB */
-#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
-#define CONFIG_ENV_SECT_SIZE		0x40000
-#endif
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN			1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
+#endif
 
-#define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
@@ -87,29 +73,41 @@
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(SCSI, scsi, 0) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+#endif
+
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
 	"loadaddr=0x80100000\0"			\
 	"kernel_addr=0x100000\0"		\
-	"fdt_high=0xffffffffffffffff\0"		\
 	"initrd_high=0xffffffffffffffff\0"	\
 	"kernel_start=0x1000000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
-
-#define CONFIG_BOOTCOMMAND		"sf probe 0:0; sf read $kernel_load "\
-					"$kernel_start $kernel_size && "\
-					"bootm $kernel_load"
+	"bootm_size=0x10000000\0"		\
+
+#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND	"pfe stop; sf probe 0:0; sf read $kernel_load "\
+				"$kernel_start $kernel_size && "\
+				"bootm $kernel_load"
+#else
+#define CONFIG_BOOTCOMMAND	"pfe stop; sf probe 0:0; sf read $kernel_load "\
+				"$kernel_start $kernel_size && "\
+				"bootm $kernel_load"
+#endif
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING		1
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS		64	/* max command args */
 
-#define CONFIG_PANIC_HANG
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 #include <asm/arch/soc.h>