X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012a_common.h;h=0c194ee575bf8840a58549064be3297416e24c6f;hb=a552ffc9d270769286d7a0697913689c31537bfa;hp=2579e2fb37ee4b4f99225fa0ed19712a9ead7cc8;hpb=c59afcff8a4ef087136e8a0ad7e2c587c32baf51;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 2579e2f..0c194ee 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -6,114 +6,57 @@
 #ifndef __LS1012A_COMMON_H
 #define __LS1012A_COMMON_H
 
-#define CONFIG_GICV2
-
 #include <asm/arch/config.h>
 #include <asm/arch/stream_id_lsch2.h>
-
-#define CONFIG_SYS_CLK_FREQ		125000000
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
-#else
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
-#endif
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+#include <linux/sizes.h>
 
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
 
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		25000000	/* 25MHz */
-
-/* CSU */
-#define CONFIG_LAYERSCAPE_NS_ACCESS
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
-
 /*SPI device */
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_TFABOOT)
-#define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_FSL_SPI_INTERFACE
-#define CONFIG_SF_DATAFLASH
-
-#define QSPI0_AMBA_BASE		0x40000000
-#define CONFIG_SPI_FLASH_SPANSION
-
-#define FSL_QSPI_FLASH_SIZE		SZ_64M
-#define FSL_QSPI_FLASH_NUM		2
-
-/*
- * Environment
- */
-#define CONFIG_ENV_OVERWRITE
-#endif
+#define CONFIG_SYS_FSL_QSPI_BASE	0x40000000
 
 /* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
 
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
-
 /* I2C */
-#define CONFIG_SYS_I2C
+
+/* GPIO */
 
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
-#ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(USB, usb, 0) \
 	func(SCSI, scsi, 0) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
-#endif
 
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
 	"loadaddr=0x80100000\0"			\
 	"kernel_addr=0x100000\0"		\
-	"fdt_high=0xffffffffffffffff\0"		\
 	"initrd_high=0xffffffffffffffff\0"	\
 	"kernel_start=0x1000000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
+	"bootm_size=0x10000000\0"		\
 
-#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_TFABOOT
-#define QSPI_NOR_BOOTCOMMAND	"pfe stop; sf probe 0:0; sf read $kernel_load "\
-				"$kernel_start $kernel_size && "\
-				"bootm $kernel_load"
-#else
-#define CONFIG_BOOTCOMMAND	"pfe stop; sf probe 0:0; sf read $kernel_load "\
+#define QSPI_NOR_BOOTCOMMAND	"sf probe 0:0; sf read $kernel_load "\
 				"$kernel_start $kernel_size && "\
 				"bootm $kernel_load"
 #endif
 
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS		64	/* max command args */
-
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 #include <asm/arch/soc.h>