X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls1012a2g5rdb.h;h=bbc3ffd7f0d35ba3a13efeb806d7a95cccadb74b;hb=8d1fc6fb89826efb6bbbedb57862496e18737877;hp=7664b96ec2dfbb07a3fd360a92fc3e69839239c0;hpb=07dea2e737f78ee70e81c27d976811f0e9fdbad8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h
index 7664b96..bbc3ffd 100644
--- a/include/configs/ls1012a2g5rdb.h
+++ b/include/configs/ls1012a2g5rdb.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2017 NXP
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __LS1012A2G5RDB_H__
@@ -12,11 +11,7 @@
 /* DDR */
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
-#define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
 /*  MMC  */
 #ifdef CONFIG_MMC
@@ -34,16 +29,10 @@
 #define CONFIG_SYS_SCSI_MAX_LUN			1
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_NET_MULTI
-
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"verify=no\0"				\
-	"fdt_high=0xffffffffffffffff\0"		\
 	"initrd_high=0xffffffffffffffff\0"	\
 	"fdt_addr=0x00f00000\0"			\
 	"kernel_addr=0x01000000\0"		\
@@ -57,6 +46,7 @@
 	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"kernelheader_size=0x40000\0"		\
+	"bootm_size=0x10000000\0"		\
 	"console=ttyS0,115200\0"		\
 	BOOTENV					\
 	"boot_scripts=ls1012ardb_boot.scr\0"	\
@@ -89,7 +79,7 @@
 	"installer=load mmc 0:2 $load_addr "	\
 		   "/flex_installer_arm64.itb; "	\
 		   "bootm $load_addr#$board\0"	\
-	"qspi_bootcmd=echo Trying load from qspi..;"	\
+	"qspi_bootcmd=pfe stop; echo Trying load from qspi..;"	\
 		"sf probe && sf read $load_addr "	\
 		"$kernel_addr $kernel_size; env exists secureboot "	\
 		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
@@ -97,10 +87,16 @@
 		"bootm $load_addr#$board\0"
 
 #undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
+			     "env exists secureboot && esbc_halt;"
+#else
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
 			   "env exists secureboot && esbc_halt;"
 #endif
+#endif
 
 #define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
 #define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"