X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Flp8x4x.h;h=a26937265a55a44ab81f2c2305704c4550858280;hb=f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a;hp=68e1a974dd0d03bb6db93d7062a5f8bd79abb9d3;hpb=85b8c5c4bf80025de4632ae6c9a8a606e51508a4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h
index 68e1a97..a269372 100644
--- a/include/configs/lp8x4x.h
+++ b/include/configs/lp8x4x.h
@@ -20,18 +20,18 @@
 #define	CONFIG_SYS_MALLOC_LEN		(128*1024)
 #define	CONFIG_ARCH_CPU_INIT
 #define	CONFIG_BOOTCOMMAND		\
-	"bootm 80000;"
+	"bootm 80000 - 240000;"
 
 #define	CONFIG_BOOTARGS			\
-	"console=ttySA0,115200 mem=128M root=/dev/mmcblk0p1 rw" \
-	"init=/sbin/init rootfstype=ext3"
+	"console=ttyS0,115200 mem=128M root=/dev/mmcblk0p1 rw" \
+	"init=/sbin/init rootfstype=ext4 rootwait"
 
 #define	CONFIG_TIMESTAMP
 #define	CONFIG_BOOTDELAY		2	/* Autoboot delay */
 #define	CONFIG_CMDLINE_TAG
 #define	CONFIG_SETUP_MEMORY_TAGS
 #define	CONFIG_LZMA			/* LZMA compression support */
-#undef	CONFIG_OF_LIBFDT
+#define	CONFIG_OF_LIBFDT
 
 /*
  * Serial Console Configuration
@@ -93,7 +93,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
@@ -101,7 +100,7 @@
  */
 #define	CONFIG_SYS_HUSH_PARSER		1
 
-#undef	CONFIG_SYS_LONGHELP
+#define	CONFIG_SYS_LONGHELP
 #ifdef	CONFIG_SYS_HUSH_PARSER
 #define	CONFIG_SYS_PROMPT		"$ "
 #else
@@ -144,7 +143,7 @@
 #define	CONFIG_ENV_SECT_SIZE		0x40000
 
 #define	PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
-#define	PHYS_FLASH_2			0x02000000	/* Flash Bank #2 */
+#define	PHYS_FLASH_2			0x04000000	/* Flash Bank #2 */
 
 #define	CONFIG_SYS_FLASH_CFI
 #define	CONFIG_FLASH_CFI_DRIVER		1
@@ -184,7 +183,7 @@
 #define	CONFIG_SYS_GAFR1_L_VAL	0x999a955a
 #define	CONFIG_SYS_GAFR1_U_VAL	0xaaa5a00a
 #define	CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
-#define	CONFIG_SYS_GAFR2_U_VAL	0x55f0a402
+#define	CONFIG_SYS_GAFR2_U_VAL	0x55f9a402
 #define	CONFIG_SYS_GAFR3_L_VAL	0x540a950c
 #define	CONFIG_SYS_GAFR3_U_VAL	0x00001599
 
@@ -232,7 +231,6 @@
  */
 #ifdef	CONFIG_CMD_USB
 #define	CONFIG_USB_OHCI_NEW
-#define	CONFIG_SYS_USB_OHCI_CPU_INIT
 #define	CONFIG_SYS_USB_OHCI_BOARD_INIT
 #define	CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 #define	CONFIG_SYS_USB_OHCI_REGS_BASE	0x4C000000