X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Flinkstation.h;h=b00647b3e01eef168660e215b4e77d703d3aa6e8;hb=0ce8437f3006f86d093f83120c64f657bbac3c31;hp=2feb3ae31d41b25d6b1b9e8584a301eadd0937f2;hpb=f61f1e150c84f5b9347fca79a4bc5f2286c545d2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
index 2feb3ae..b00647b 100644
--- a/include/configs/linkstation.h
+++ b/include/configs/linkstation.h
@@ -20,6 +20,22 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ *
+ * Standard configuration - all models
+ * 0xFFF00000	boot from flash
+ *
+ * Test configuration (boot from RAM using uloader.o)
+ * LinkStation HD-HLAN and KuroBox Standard
+ * 0x03F00000	boot from RAM
+ * LinkStation HD-HGLAN and KuroBox HG
+ * 0x07F00000	boot from RAM
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE	0xFFF00000
+#endif
+
 #if 0
 #define DEBUG
 #endif
@@ -96,8 +112,6 @@
 
 #define CONFIG_OF_LIBFDT	1
 
-#define OF_CPU			"PowerPC,603e"
-#define OF_SOC			"soc10x@80000000"
 #define OF_STDOUT_PATH		"/soc10x/serial@80004600"
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -219,7 +233,7 @@
 
 #define CONFIG_SYS_FLASH_BASE		0xFFC00000
 #define CONFIG_SYS_FLASH_SIZE		0x00400000
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 #define CONFIG_SYS_EUMB_ADDR		0x80000000
@@ -242,7 +256,7 @@
 #endif
 
 /*-----------------------------------------------------------------------
- * Change TEXT_BASE in bord/linkstation/config.mk to get a RAM build
+ * Change CONFIG_SYS_TEXT_BASE in bord/linkstation/config.mk to get a RAM build
  *
  * RAM based builds are for testing purposes. A Linux module, uloader.o,
  * exists to load U-Boot and pass control to it
@@ -261,9 +275,8 @@
 #else
 #define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
 #endif
-#define CONFIG_SYS_INIT_RAM_END	0x1000
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*----------------------------------------------------------------------
  * Serial configuration
@@ -292,7 +305,7 @@
  * taken from the orignal Linkstation boot code
  *
  * Most of the low level configuration setttings are normally used
- * in cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
+ * in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
  * Low level initialisation is done in board/linkstation/early_init.S
  * The values below are included for reference purpose only
  */
@@ -497,12 +510,4 @@
  */
 #define CONFIG_DOS_PARTITION
 
-/*-----------------------------------------------------------------------
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
 #endif	/* __CONFIG_H */