X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Flegoev3.h;h=c5e7d629ab0eb0046f87bf7b81c408f7b2729f90;hb=3bd25cb512b912e9c8e9074467e730a73f87371d;hp=b6d4a79564c24be1c201e4d446a506cf55f55bc1;hpb=588d269ffe736c3dc03f63c3708d82eb33e670ee;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h
index b6d4a79..c5e7d62 100644
--- a/include/configs/legoev3.h
+++ b/include/configs/legoev3.h
@@ -26,12 +26,9 @@
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_DA850_PLL_INIT
-#define CONFIG_SYS_DA850_DDR_INIT
 
 #define CONFIG_SYS_TEXT_BASE		0xc1080000
 
-
 /*
  * Memory Info
  */
@@ -125,10 +122,8 @@
 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART1_BASE /* Base address of UART1 */
 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
-#define CONFIG_BAUDRATE		115200		/* Default baud rate */
 
 #define CONFIG_SPI
-#define CONFIG_CMD_SF
 #define CONFIG_DAVINCI_SPI
 #define CONFIG_SYS_SPI_BASE		DAVINCI_SPI0_BASE
 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI0_CLKID)
@@ -146,16 +141,13 @@
 /*
  * U-Boot general configuration
  */
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16 /* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 #define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
@@ -171,8 +163,6 @@
 #define CONFIG_SERIAL_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_SETUP_INITRD_TAG
-#define CONFIG_BOOTDELAY	0
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 #define CONFIG_BOOTCOMMAND \
 	"if mmc rescan; then " \
 		"if run loadbootscr; then " \
@@ -211,40 +201,15 @@
 /*
  * U-Boot commands
  */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
 
 #ifdef CONFIG_CMD_BDI
 #define CONFIG_CLOCKS
 #endif
 
-#define CONFIG_CMD_SPI
-
 #define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_SIZE		(16 << 10)
 
-/* SD/MMC configuration */
-#define CONFIG_MMC
-#define CONFIG_DAVINCI_MMC_SD1
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DAVINCI_MMC
-
-/*
- * Enable MMC commands only when
- * MMC support is present
- */
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MMC
-#endif
-
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0xc0000000