X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Flacie_kw.h;h=9b70eed46f7cd324037c809186817c1a1039e1e4;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=8af8fd5c63be81aea39086105fc486c33ef7255c;hpb=d673668964f1e8c65675978b737169c2aa9e2a2d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h
index 8af8fd5..9b70eed 100644
--- a/include/configs/lacie_kw.h
+++ b/include/configs/lacie_kw.h
@@ -6,113 +6,30 @@
 #ifndef _CONFIG_LACIE_KW_H
 #define _CONFIG_LACIE_KW_H
 
-/*
- * Machine number definition
- */
-#if defined(CONFIG_INETSPACE_V2)
-#define CONFIG_MACH_TYPE		MACH_TYPE_INETSPACE_V2
-#elif defined(CONFIG_NETSPACE_V2)
-#define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_V2
-#elif defined(CONFIG_NETSPACE_LITE_V2)
-#define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_LITE_V2
-#elif defined(CONFIG_NETSPACE_MINI_V2)
-#define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_MINI_V2
-#elif defined(CONFIG_NETSPACE_MAX_V2)
-#define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_MAX_V2
-#elif defined(CONFIG_D2NET_V2)
-#define CONFIG_MACH_TYPE		MACH_TYPE_D2NET_V2
-#elif defined(CONFIG_NET2BIG_V2)
-#define CONFIG_MACH_TYPE		MACH_TYPE_NET2BIG_V2
-#else
-#error "Unknown board"
-#endif
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
-/* SoC name */
-#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
-#define CONFIG_KW88F6192
-#else
-#define CONFIG_KW88F6281
-#endif
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-
-/*
- * Core clock definition
- */
-#define CONFIG_SYS_TCLK			166000000 /* 166MHz */
-
-/*
- * SDRAM configuration
- */
-#define CONFIG_NR_DRAM_BANKS		1
-
-/*
- * Different SDRAM configuration and size for some of the boards derived
- * from the Network Space v2
- */
-#if defined(CONFIG_INETSPACE_V2)
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg
-#elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg
-#endif
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
 #include "mv-common.h"
 
 /* Remove or override few declarations from mv-common.h */
-#undef CONFIG_ENV_SPI_MAX_HZ
-#undef CONFIG_SYS_IDE_MAXBUS
-#undef CONFIG_SYS_IDE_MAXDEVICE
-#define CONFIG_ENV_SPI_MAX_HZ           20000000 /* 20Mhz */
 
 /*
  * Enable platform initialisation via misc_init_r() function
  */
-#define CONFIG_MISC_INIT_R
 
 /*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_MVGBE_PORTS		{1, 0} /* enable port 0 only */
-#define CONFIG_NETCONSOLE
-#endif
-
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
-#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
-	defined(CONFIG_NET2BIG_V2)
-#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
-#define CONFIG_SYS_IDE_MAXBUS           2
-#define CONFIG_SYS_IDE_MAXDEVICE        2
-#else
-#define CONFIG_SYS_IDE_MAXBUS           1
-#define CONFIG_SYS_IDE_MAXDEVICE        1
 #endif
-#endif /* CONFIG_MVSATA_IDE */
 
 /*
  * Enable GPI0 support
  */
-#define CONFIG_KIRKWOOD_GPIO
 
 /*
  * Enable I2C support
  */
 #ifdef CONFIG_CMD_I2C
 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4 /* 16-byte page size */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1 /* 8-bit device address */
 #if defined(CONFIG_NET2BIG_V2)
 #define CONFIG_SYS_I2C_G762_ADDR		0x3e
 #endif
@@ -129,17 +46,10 @@
 /*
  * Environment variables configurations
  */
-#define CONFIG_ENV_SECT_SIZE		0x10000	/* 64KB */
-#define CONFIG_ENV_SIZE			0x1000	/* 4KB */
-#define CONFIG_ENV_ADDR			0x70000
-#define CONFIG_ENV_OFFSET		0x70000	/* env starts here */
 
 /*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND					\
-	"dhcp && run netconsole; "				\
-	"if run usbload || run diskload; then bootm; fi"
 
 #define CONFIG_EXTRA_ENV_SETTINGS				\
 	"stdin=serial\0"					\
@@ -147,13 +57,12 @@
 	"stderr=serial\0"					\
 	"bootfile=uImage\0"					\
 	"loadaddr=0x800000\0"					\
-	"autoload=no\0"						\
 	"netconsole="						\
 		"set stdin $stdin,nc; "				\
 		"set stdout $stdout,nc; "			\
 		"set stderr $stderr,nc;\0"			\
-	"diskload=ide reset && "				\
-		"ext2load ide 0:1 $loadaddr /boot/$bootfile\0"	\
+	"diskload=sata init && "				\
+		"ext2load sata 0:1 $loadaddr /boot/$bootfile\0"	\
 	"usbload=usb start && "					\
 		"fatload usb 0:1 $loadaddr /boot/$bootfile\0"