X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fkorat.h;h=5494a6007dfb32c8903b388520d4a4d3456ade11;hb=b9cb64825b5e6efeb715abd8b48d9b12f98973e9;hp=55485c209bdab1cf2ec06fcc71b573d6b0c67e91;hpb=553f09823cced77296825f615f00321d932bf914;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/korat.h b/include/configs/korat.h
index 55485c2..5494a60 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -9,20 +9,7 @@
  * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
  * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -35,7 +22,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_440EPX		1	/* Specific PPC440EPx		*/
-#define CONFIG_4xx		1	/* ... PPC4xx family		*/
 #define CONFIG_SYS_CLK_FREQ	33333333
 
 #ifdef CONFIG_KORAT_PERMANENT
@@ -89,8 +75,7 @@
 #undef CONFIG_SYS_INIT_RAM_DCACHE
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM			*/
 #define CONFIG_SYS_INIT_RAM_SIZE	(4 << 10)
-#define CONFIG_SYS_GBL_DATA_SIZE	256	/* num bytes initial data	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*
@@ -103,7 +88,6 @@
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #define CONFIG_SYS_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SERIAL_MULTI	1
 
 #define CONFIG_SYS_BAUDRATE_TABLE						\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -157,11 +141,11 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
@@ -251,7 +235,6 @@
 #define CONFIG_HAS_ETH0
 #define CONFIG_SYS_RX_ETH_BUFFER	32	/* Number of ethernet rx	*/
 					/*   buffers & descriptors	*/
-#define CONFIG_NET_MULTI	1
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
 #define CONFIG_PHY1_ADDR	3
 
@@ -323,7 +306,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	        "=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
@@ -340,8 +322,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO		1  /* To use extended board_into (bd_t)	*/
 
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW		1	/* enable loopw command		*/
 #define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands	*/
@@ -358,6 +338,7 @@
  */
 /* General PCI */
 #define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP	*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
@@ -560,7 +541,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400 /* speed to run kgdb serial port	*/
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
 /* Pass open firmware flat tree */