X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fkontron_sl28.h;h=940bfd2b336afa25041121f3c1c63358f27405a7;hb=ac2587907b5473779c80e0eb8478b67997c14439;hp=6769592101def84235a220416555695c07bb21df;hpb=776bf6a5457eb0c61c367d1ee7e45733a1c72ed6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h
index 6769592..940bfd2 100644
--- a/include/configs/kontron_sl28.h
+++ b/include/configs/kontron_sl28.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 
-#ifndef __SL28_H
-#define __SL28_H
+#ifndef __SL28_CONFIG_H
+#define __SL28_CONFIG_H
 
 #include <asm/arch/stream_id_lsch3.h>
 #include <asm/arch/config.h>
@@ -12,55 +12,33 @@
 
 /* we don't have secure memory unless we have a BL31 */
 #ifndef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
-#undef CONFIG_SYS_MEM_RESERVE_SECURE
+#undef CFG_SYS_MEM_RESERVE_SECURE
 #endif
 
-/* DDR */
-#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
-
-#define CONFIG_VERY_BIG_RAM
-#define CONFIG_CHIP_SELECTS_PER_CTRL	4
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
-#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_DDR_BLOCK2_BASE	0x2080000000ULL
-#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS	1
+#define CFG_SYS_DDR_SDRAM_BASE	0x80000000
+#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
+#define CFG_SYS_SDRAM_BASE		CFG_SYS_DDR_SDRAM_BASE
+#define CFG_SYS_DDR_BLOCK2_BASE	0x2080000000ULL
 
 /* early stack pointer */
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xeff0)
-
-/* memtest command */
-#define CONFIG_SYS_MEMTEST_START        0x80000000
-#define CONFIG_SYS_MEMTEST_END          0x9fffffff
 
 /* SMP */
 #define CPU_RELEASE_ADDR		secondary_boot_addr
 
 /* generic timer */
-#define COUNTER_FREQUENCY		25000000
 
 /* early heap for SPL DM */
-#define CONFIG_MALLOC_F_ADDR		CONFIG_SYS_FSL_OCRAM_BASE
+#define CFG_MALLOC_F_ADDR		CFG_SYS_FSL_OCRAM_BASE
 
 /* serial port */
-#define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
-
-#define CONFIG_SYS_CLK_FREQ		100000000
-#define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ / 4)
-
-/* ethernet */
-#define CONFIG_SYS_RX_ETH_BUFFER	8
+#define CFG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
 
 /* SPL */
-#define CONFIG_SPL_BSS_START_ADDR	0x80100000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x00100000
-#define CONFIG_SPL_MAX_SIZE		0x20000
-#define CONFIG_SPL_STACK		(CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x00100000
-#define CONFIG_SYS_SPL_MALLOC_START	0x80200000
-#define CONFIG_SYS_MONITOR_LEN		(1024 * 1024)
+/* GUID for capsule updatable firmware image */
+#define KONTRON_SL28_FIT_IMAGE_GUID \
+	EFI_GUID(0x86ebd44f, 0xfeb8, 0x466f, 0x8b, 0xb8, \
+		 0x89, 0x06, 0x18, 0x45, 0x6d, 0x8b)
 
 /* environment */
 /* see include/configs/ti_armv7_common.h */
@@ -83,12 +61,14 @@
 	func(PXE, pxe, 0)
 #include <config_distro_bootcmd.h>
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
 	"env_addr=0x203e0004\0" \
 	"envload=env import -d -b ${env_addr}\0" \
 	"install_rcw=source 20200000\0" \
 	"fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \
+	"dfu_alt_info=sf 0:0=u-boot-bin raw 0x210000 0x1d0000;" \
+			    "u-boot-env raw 0x3e0000 0x20000\0" \
 	ENV_MEM_LAYOUT_SETTINGS \
 	BOOTENV
 
-#endif /* __SL28_H */
+#endif /* __SL28_CONFIG_H */