X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fkontron_sl28.h;h=77ea1327f9a4e26e773f90c61bb6181caa3d39e4;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=bfb4e67c8f45b431f904ec8843f743ad61cf16ed;hpb=296d5cffdd08298cb41fb82122f29f4c329df569;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h
index bfb4e67..77ea132 100644
--- a/include/configs/kontron_sl28.h
+++ b/include/configs/kontron_sl28.h
@@ -16,12 +16,9 @@
 #endif
 
 /* DDR */
-#define CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE		0xdeadbeef
 
 #define CONFIG_VERY_BIG_RAM
-#define CONFIG_CHIP_SELECTS_PER_CTRL	4
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
@@ -32,32 +29,19 @@
 /* early stack pointer */
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xeff0)
 
-/* memtest command */
-#define CONFIG_SYS_MEMTEST_START        0x80000000
-#define CONFIG_SYS_MEMTEST_END          0x9fffffff
-
 /* SMP */
 #define CPU_RELEASE_ADDR		secondary_boot_addr
 
 /* generic timer */
 #define COUNTER_FREQUENCY		25000000
 
-/* size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2048 * 1024)
-
 /* early heap for SPL DM */
 #define CONFIG_MALLOC_F_ADDR		CONFIG_SYS_FSL_OCRAM_BASE
 
 /* serial port */
 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_CLK_FREQ		100000000
-#define CONFIG_DDR_CLK_FREQ		100000000
-#define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ / 4)
 
-/* ethernet */
-#define CONFIG_SYS_RX_ETH_BUFFER	8
+#define COUNTER_FREQUENCY_REAL		(get_board_sys_clk() / 4)
 
 /* SPL */
 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
@@ -71,7 +55,6 @@
 
 /* environment */
 /* see include/configs/ti_armv7_common.h */
-#define CONFIG_SYS_LOAD_ADDR		0x82000000
 #define ENV_MEM_LAYOUT_SETTINGS \
 	"loadaddr=0x82000000\0" \
 	"kernel_addr_r=0x82000000\0" \
@@ -96,6 +79,8 @@
 	"envload=env import -d -b ${env_addr}\0" \
 	"install_rcw=source 20200000\0" \
 	"fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \
+	"dfu_alt_info=sf 0:0=u-boot-bin raw 0x210000 0x1d0000;" \
+			    "u-boot-env raw 0x3e0000 0x20000\0" \
 	ENV_MEM_LAYOUT_SETTINGS \
 	BOOTENV